help with new barrel for 6.5 g
|
help with new barrel for 6.5 g
|
|
08-18-2011, 01:15 AM
HI, my name is Brett i am building a 6.5 g obviously and would like a barrel to be sub moa at 100 yards. I want to be shooting out to 800 yards at my longest. It will be a target gun and an occasional deer gun. i already have a mega billet upper and lower wanting a great barrel to match. please help.
08-18-2011, 01:27 AM
Satern barrels has a few choices left. My 24" is fantastic. You get what you pay for...
http://www.saternmachining.com/satern_discontinued_sale
08-18-2011, 02:53 AM
i have looked at them but none that i would want in the discontinued section> I wish they would still make them. Shilen doesnt make the 6.5 g either.
08-18-2011, 03:53 AM
If you're on a tight budget, consider the AR Stoner (E.R. Shaw) 24" from Midway. The finish inside the bore was the finest I've ever gotten in an AR15 barrel. It comes with an AA bolt and it shoots an Amax 123 over 29gr of 8208 sub-MOA as long as I'm shooting in sub-MOA form.
![[Image: 1fcodc.jpg]](http://i52.tinypic.com/1fcodc.jpg) You don't get the bragging rights of a higher priced barrel, but I'd venture that it is more accurate than I am. Shoots both the 100 and 120gr Nosler Ballistic Tips equally well with the right load and COL. Those three are all that I've tried through mine. I do intend to try some 140s ahead of AR-Comp as soon as I can pick some up. Recent results with AR-Comp suggest it will perform quite robustly with a slightly heavier bullet. We'll see... Hoot Edit: Flyers courtesy of the fellow next to me shooting the SAKO .338 Lapua Magnum, with the timing of Jerry Lewis. :mad:
08-18-2011, 04:57 AM
wanting a 20 to 24 inch for long range accuracy. that some pretty good shooting right there. I will check that barrel out on midway. thank you.
08-18-2011, 06:49 AM
How are the aa 20inch bull barrel.
08-18-2011, 01:57 PM
Well, Shilen does make Grendel barrels, and sells them exclusively through Alexander Arms, it's one of the available upgrades on several models.
You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death that we wish to avoid, but life that we wish to live. - John Galt
08-18-2011, 01:59 PM
If you want just a barrel, give Templar a call. Good reputation for cut barrels.
http://www.templarconsultingllc.com/temp..._Page.html
You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death that we wish to avoid, but life that we wish to live. - John Galt
08-18-2011, 10:16 PM
Just ordered a shilen 20inch barrel from templar. Thank you everyone for the help.
08-19-2011, 01:56 AM
i have seen barrels chambered in 264 lbc ar can i use my dies for 6.5 g and the same 6.5 g brass. Is it safe to shoot with a barrel chambered in it with grendel ammo.
08-19-2011, 02:00 AM
Nxttiger Wrote:i have seen barrels chambered in 264 lbc ar can i use my dies for 6.5 g and the same 6.5 g brass. Is it safe to shoot with a barrel chambered in it with grendel ammo. Yes to all. The ammo is the same. The slight difference is in the chamber dimensions.
Drifter
09-02-2011, 02:45 AM
Drifter Wrote:Yes to all. The ammo is the same. The slight difference is in the chamber dimensions. could you explain more in lame terms please? on the fence for my barrel, thinking of the satern 24 inch 1-8.75 .264 LBC
09-02-2011, 02:55 AM
PumpActionJackson Wrote:could you explain more in lame terms please? on the fence for my barrel, thinking of the satern 24 inch 1-8.75 .264 LBC Link: .264 LBC-AR: A Grendel clone
Drifter
09-02-2011, 04:07 AM
I have a shilen 19.5 from AA ....So far so good.
09-21-2011, 09:18 PM
If the next diameter is tighter than a true 6.5 Grendel chamber, you can run into problems with feeding, since some brass might be on the higher end of tolerance (but will still run in a Grendel chamber), then won't fit the chamber in a .264 LBC. If barrel-makers stray from the real chamber dimensions, don't expect reliability.
09-21-2011, 10:15 PM
I quess the same could be said for the 6.5 BPC. I purchased my 6.5 BPC barrel from McGowen Barrel and have had no feeding issues. I did have some ejection problems due to the undersized gas port hole, but that was easily fixed. Read link: http://wildcatintel.com/blog/?m=201003
09-22-2011, 05:21 PM
I think Satern is out of the Grendel barrels. Either that, or I just couldn't find any on their barrels on hand.
09-22-2011, 05:53 PM
Midway has an AA 24" upper still:
http://www.midwayusa.com/viewProduct/?pr...ber=115064 Satern is now calling them .264 LBC: http://www.midwayusa.com/viewProduct/def...ber=983264 I wonder if they changed anything at all.
09-22-2011, 06:31 PM
LRRPF52 Wrote:Satern is now calling them .264 LBC: I think the cartridge designation simply changed for barrels that Midway had on hand. Like Satern barrels at Midway, I think the AR Stoner barrels were formerly Grendel, but now show as 264 LBC. That's not to say that Satern will not offer 264 LBC barrels, but that's just my speculation on the existing inventory at Midway.
Drifter
|
|
« Next Oldest | Next Newest »
|
