01-12-2014, 04:35 PM
My AA 24 Inch Barrel was threaded 9/16x24. I purchased a thread adapter to make it 5/8x24 cost 54 bucks. look them up online cheaper than have the barrel cut and rethreaded. Thunder beast arms has a break attach suppressor that has a brake that will attach to 9/16x 24 as well as other thread patterns. Attach brake to your thread pattern then attach suppressor to brake. Look for a suppressor that allow you to attach to the thread pattern on your barrel. The outside thread pattern on the brake is
the same thread pitch for their suppressors. So if you have several barrels you can purchase a brake with the correct inside thread pattern and then move your suppressor between rifles. or your other options are
1. Cut Barrel and thread 5/8x24 or you desired thread pattern
2. Buy a thread adapter to convert to 5/8x24 or your desired thread pattern
3. or buy a TBAC suppressor or one similar with a brake attach suppressor that has your thread pattern
Barrel Thread Pattern (Inside thread Pattern)
(1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5)
the same thread pitch for their suppressors. So if you have several barrels you can purchase a brake with the correct inside thread pattern and then move your suppressor between rifles. or your other options are
1. Cut Barrel and thread 5/8x24 or you desired thread pattern
2. Buy a thread adapter to convert to 5/8x24 or your desired thread pattern
3. or buy a TBAC suppressor or one similar with a brake attach suppressor that has your thread pattern
Barrel Thread Pattern (Inside thread Pattern)
(1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5)