Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Some assembly required
#9
Last Friday I was able to take 3 of my centerfire rifles to one of the clubs that I shoot at and was able to test my calculated zero at 200 yards as well as seeing how the rifles group. I have been handloading and shooting groups for nearly 50 years but have never shot groups at 200 yards, my long range shooting being limited to Varmint hunting. I was pleased with the results I saw from all 3 rifles but particularly pleased with my Krieger barreled AR-15.

[ATTACH=CONFIG]4291[/ATTACH]

The wind was from the left and variable around 5 mph.

The load was 27.7 grains of IMR 8208 XBR behind a 123 gr Lapua Scenar. CCI 450 primers were used in the Alexander Arms (Lapua) cases. This load produces 2411 fps out of the 22 inch barrel.

I now am getting a little more amped up for a 6.5 X 47 Lapua build I'm working on so I can play some more at longer ranges. 300 yards is next not to mention some further 200 yard shooting in better weather conditions.
Reply


Messages In This Thread
Some assembly required - by Bike Effects - 09-14-2013, 07:31 AM
Some assembly required - by ricsmall - 09-14-2013, 12:07 PM
Some assembly required - by Bike Effects - 10-02-2013, 03:12 AM
Some assembly required - by ricsmall - 10-02-2013, 03:27 AM
Some assembly required - by Bike Effects - 10-02-2013, 06:00 AM
Some assembly required - by biodsl - 10-02-2013, 06:57 AM
Some assembly required - by lrgrendel - 10-02-2013, 09:40 AM
Some assembly required - by dave102269 - 10-02-2013, 10:24 AM
Some assembly required - by Bike Effects - 12-09-2013, 07:34 AM
Some assembly required - by bigbear_98 - 12-09-2013, 03:10 PM
Some assembly required - by biodsl - 12-09-2013, 05:34 PM
Some assembly required - by VASCAR2 - 12-09-2013, 06:30 PM
Some assembly required - by Tedward - 12-09-2013, 06:41 PM
Some assembly required - by LRRPF52 - 12-10-2013, 12:09 AM
Some assembly required - by Bike Effects - 12-10-2013, 01:10 AM
Some assembly required - by Bike Effects - 12-10-2013, 01:20 AM
Some assembly required - by LRRPF52 - 12-10-2013, 06:05 PM
Some assembly required - by Bike Effects - 12-11-2013, 05:56 AM
Some assembly required - by LRRPF52 - 12-11-2013, 08:19 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)