06-22-2012, 02:20 PM
Dave Bell Wrote:OK, I went out to the shop and got a resized brass with primer and dropped it into the chamber, let the bolt fly and it's not going into battery. So, most likely my resized brass is all wrong. I ran 7.62 through the grendel dye and thought that was all I was supposed to do. I ran it through in the same manner that I would in reloading. Is that not correct?
Dave:
Screw the sizing die down hard on the shell holder and try a piece of the 7.62 X 39 brass.
LR1955