05-14-2011, 10:13 AM
http://www.froglube.com/
I shot my 5.56mm carbine so much it was stinking filthy and I had used this lube before it was fired, I preheated the BCG in the toaster oven to 200 degrees after really coating in well.
My friend was with me (class III guy) and we shot the living crap out of it, supressed as fast as we could.
The clean up two weeks later only took 10 min and the tail of the bolt nearly wiped clean with a rag.
There was so much gunk it was stupid and yet it all wiped off.
This stuff does not run off when hot either.
It can be safely used in bbls, get the bbl cleanand then use some bore paste to get it perfect.
Then use a patch with a bore brush and run it through, then use a dry patch and do the same so you don't get too much in the bbl, just a slight film.
I shot my 5.56mm carbine so much it was stinking filthy and I had used this lube before it was fired, I preheated the BCG in the toaster oven to 200 degrees after really coating in well.
My friend was with me (class III guy) and we shot the living crap out of it, supressed as fast as we could.
The clean up two weeks later only took 10 min and the tail of the bolt nearly wiped clean with a rag.
There was so much gunk it was stupid and yet it all wiped off.
This stuff does not run off when hot either.
It can be safely used in bbls, get the bbl cleanand then use some bore paste to get it perfect.
Then use a patch with a bore brush and run it through, then use a dry patch and do the same so you don't get too much in the bbl, just a slight film.