06-13-2012, 02:37 PM
Howdy shooters,
Well i was going through some brass and noticed every piece of factory brass i have shot has a ring going around it, just under the shoulder of the case. The ring goes all the way around 100% so far its not effecting accuracy or function of the rifle.
Im worried it may seal off at the ring and not where it should though:confused: as some of the cases are dirty from the scratch forward. I have talked with the guys at templar about it and they wanted me to send it back in to be fixed, im thinking to fix it they may have to remove a little bit of material, which may shorten brass life down the road:confused: the rings in the brass were near impossible to get a picture of but i tried, im not sure if i should leave it alone or if it needs to go back, so any help would be killer ill try to post some pics showing the rings.
its shooting so good id rather just leave it alone, but i wanted to hear what you guys had to say first.
in this pic you can see it better on the two in the side,
![[Image: DSCN1672.jpg]](http://i254.photobucket.com/albums/hh107/doob3r/DSCN1672.jpg)
Well i was going through some brass and noticed every piece of factory brass i have shot has a ring going around it, just under the shoulder of the case. The ring goes all the way around 100% so far its not effecting accuracy or function of the rifle.
Im worried it may seal off at the ring and not where it should though:confused: as some of the cases are dirty from the scratch forward. I have talked with the guys at templar about it and they wanted me to send it back in to be fixed, im thinking to fix it they may have to remove a little bit of material, which may shorten brass life down the road:confused: the rings in the brass were near impossible to get a picture of but i tried, im not sure if i should leave it alone or if it needs to go back, so any help would be killer ill try to post some pics showing the rings.
its shooting so good id rather just leave it alone, but i wanted to hear what you guys had to say first.
in this pic you can see it better on the two in the side,