Mag mods

[Steve_evetS]

I bought 3 ASC 25 round Mags in 2019 and all three the forward edge caught the neck of the case, that's why I modified the forward edge of the mag. I also experienced a bad dent where the shoulder met the body of the case, which I am pretty sure resulted in my wolf ammo rupturing at that section. That's the reason I removed material. In the pic you can see the aggressive shelf on either side of the forward feed lips. This edge forces the round towards the middle of the magazine and aligns it with the feed ramps. That hard edge puts a nice gouge in the "brass" in the case of the wolf ammo rupture "steel".
[ATTACH=CONFIG]20073[/ATTACH]