Which gas block for suppressor

[montana]

A silencer increases the time it takes for the gas to exit. That's it.



Every millisecond you can resist opening the chamber is time for gas to go out the muzzle, and not come out the chamber at your face.

Every millisecond you can resist opening the chamber is time for gas pressure to drop in the chamber, and not come out as loud in you ear.

Also, slower extraction due to lower port pressure reduces bent or ripped case rims.

Not exactly true. In May of 1964, Bill Davis (the AR-15 ammunition project manager) left Frankfort Arsenal and started working at Colt as XM16E1 Engineering project manager..While at Colt, he discovered Colt had done some kinematic studies that substantiated the closing velocities of the AR-15 studies he had obtained from Springfield Armory.. Colts new heavier buffer invented by Colts chief product engineer Forest Sturtevant was 3 times as heavy as the original Edgewater buffer..They discovered the new buffer's added weight on the dwell time or bolt opening cycle was (negligible)..

Complete rim shear with cases of acceptable hardness very seldom happens..