Finally got settled after far too long of not reloading and shooting after the move.
Switched to a magnetospeed v3 + mk machining pic mount and man what a treat it is to not have to setup a chrono during a cease fire.
Anyways.. started at 29.7 up to 30.6 in .3 increments, this is the load I'll be tuning.
30.3gr LVR
2.285 COAL
130gr Berger AR Hybrid OTM
CCI 41 primers
Lapua 3x fired and 1x annealed brass
Slight taper crimp from lee die to keep things solid as I run a gas gun
Outside temp was 103 F so I'm not worried about change of season so much. 30.6 showed no signs but was audibly different i thought so stopped.
Next run (this weekend) I'll run at 300 to see grouping. 2.285 was .75moa @100
![[Image: Screenshot-20210921-182338-XFR-REV2.jpg]](https://i.postimg.cc/nhZtKxx3/Screenshot-20210921-182338-XFR-REV2.jpg)
Just a 22" rack grade criterion
Switched to a magnetospeed v3 + mk machining pic mount and man what a treat it is to not have to setup a chrono during a cease fire.
Anyways.. started at 29.7 up to 30.6 in .3 increments, this is the load I'll be tuning.
30.3gr LVR
2.285 COAL
130gr Berger AR Hybrid OTM
CCI 41 primers
Lapua 3x fired and 1x annealed brass
Slight taper crimp from lee die to keep things solid as I run a gas gun
Outside temp was 103 F so I'm not worried about change of season so much. 30.6 showed no signs but was audibly different i thought so stopped.
Next run (this weekend) I'll run at 300 to see grouping. 2.285 was .75moa @100
Just a 22" rack grade criterion