03-26-2012, 08:03 PM
The magazine was NIW and Spike's lower; just some dealer at the show.
Looking down as the magazine would be oriented in the receiver (without inserting it), it appears there is perhaps a bit of bow on the right-between the follower and side. About at the point where the dummy half-round starts sloping upwards. It appears the lips slightly angle from the front, widening towards the back. I'll double-check that later; that may be why the rounds don't strip freely, as the rim is maybe held slighly more captive combined with upward pressure from the lower rounds/spring.
Wouldn't hurt to keep a load under pressure for a few days.
Looking down as the magazine would be oriented in the receiver (without inserting it), it appears there is perhaps a bit of bow on the right-between the follower and side. About at the point where the dummy half-round starts sloping upwards. It appears the lips slightly angle from the front, widening towards the back. I'll double-check that later; that may be why the rounds don't strip freely, as the rim is maybe held slighly more captive combined with upward pressure from the lower rounds/spring.
Wouldn't hurt to keep a load under pressure for a few days.