So i am at the range with my 6.5 Grendel, This gun has 3875 rounds though it with no problems, It is a 20" OdinWorks barrel and matching bolt with an adjustable gas block, BCM Milspec Carbine Stock Mounting kit standard carbine buffer 2.9oz, and 2/3rds of the way through the day it suddenly starts giving me problems. It is failing to eject, Now i had also cleaned the gun prior to this trip but i had put 130 rds through it before it started giving me problems.
At the range i examined the bolt and bolt carrier and did not see anything wrong and i checked the throat of the barrel and again did not see anything, If i pointed the gun up the case would just drop out so it was not sticking in the throat of the barrel. I have not had a chance to do a further examination as i was getting tired that day and i just packed up and went home but i am thinking gas/gas block problem an i on the right track ?, Thanks in advance for any help you can give me, Brian
So i finally had a chance to really look over the Bolt and i found the problem, I found the Extractor was chipped and their was a small piece missing. With my old eyes i missed it.
At the range i examined the bolt and bolt carrier and did not see anything wrong and i checked the throat of the barrel and again did not see anything, If i pointed the gun up the case would just drop out so it was not sticking in the throat of the barrel. I have not had a chance to do a further examination as i was getting tired that day and i just packed up and went home but i am thinking gas/gas block problem an i on the right track ?, Thanks in advance for any help you can give me, Brian
So i finally had a chance to really look over the Bolt and i found the problem, I found the Extractor was chipped and their was a small piece missing. With my old eyes i missed it.