12-15-2011, 05:19 AM
I have a Shilen 6.5 mm 1-9 twist barrel that was turned down to an HBAR profile
22" long with a smith enterprises flash suppressor and a clamp on rail gas block
I have 70 rounds down the tube.
The bolt is a 7.62 x 39 bolt with a modified extractor so it wont tear up the brass
Barrel is parkerized
I got a 3 shot group under 1 inch after sighting in using brass that I was fireforming for the first time.
Bolt and barrel are head spaced properly come with gas tube and barrel extension.
No barrel nut
I will cut down recrown and thread for flash suppressor if someone wants a shorter barrel.
I have feedback under username milsurpcollector on gunbroker
$325 money order with shipping barrel, bolt, gas block and flash suppressor
$25 plus shipping Hornady dies with shell holder
$25 brass about 100 rounds some fire formed some not
![[Image: 100_7842-1.jpg]](http://i52.photobucket.com/albums/g4/milsurpcollector/100_7842-1.jpg)
![[Image: 100_7846.jpg]](http://i52.photobucket.com/albums/g4/milsurpcollector/100_7846.jpg)
22" long with a smith enterprises flash suppressor and a clamp on rail gas block
I have 70 rounds down the tube.
The bolt is a 7.62 x 39 bolt with a modified extractor so it wont tear up the brass
Barrel is parkerized
I got a 3 shot group under 1 inch after sighting in using brass that I was fireforming for the first time.
Bolt and barrel are head spaced properly come with gas tube and barrel extension.
No barrel nut
I will cut down recrown and thread for flash suppressor if someone wants a shorter barrel.
I have feedback under username milsurpcollector on gunbroker
$325 money order with shipping barrel, bolt, gas block and flash suppressor
$25 plus shipping Hornady dies with shell holder
$25 brass about 100 rounds some fire formed some not