WTS .264 LBC barrel and bolt plus brass and dies - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: EQUIPMENT EXCHANGE (https://65grendel.com/forumdisplay.php?fid=4) +--- Forum: Buy, Sell, or Trade (https://65grendel.com/forumdisplay.php?fid=20) +--- Thread: WTS .264 LBC barrel and bolt plus brass and dies (/showthread.php?tid=1697)

WTS .264 LBC barrel and bolt plus brass and dies - milsurpcollector - 12-15-2011 I have a Shilen 6.5 mm 1-9 twist barrel that was turned down to an HBAR profile 22" long with a smith enterprises flash suppressor and a clamp on rail gas block I have 70 rounds down the tube. The bolt is a 7.62 x 39 bolt with a modified extractor so it wont tear up the brass Barrel is parkerized I got a 3 shot group under 1 inch after sighting in using brass that I was fireforming for the first time. Bolt and barrel are head spaced properly come with gas tube and barrel extension. No barrel nut I will cut down recrown and thread for flash suppressor if someone wants a shorter barrel. I have feedback under username milsurpcollector on gunbroker $325 money order with shipping barrel, bolt, gas block and flash suppressor $25 plus shipping Hornady dies with shell holder $25 brass about 100 rounds some fire formed some not WTS .264 LBC barrel and bolt plus brass and dies - sgt_murf - 12-15-2011 Sir, what is the Dia of the barrel at the gas port /block? WTS .264 LBC barrel and bolt plus brass and dies - milsurpcollector - 12-16-2011 Its a .936 gas block WTS .264 LBC barrel and bolt plus brass and dies - Tooreal - 12-16-2011 Pm sent. WTS .264 LBC barrel and bolt plus brass and dies - louieprkr - 12-25-2011 Pm sent