05-14-2017, 04:51 PM
(This post was last modified: 05-14-2017, 04:59 PM by NugginFutz.)
If your Grendel cases are sticking at all, I would submit that you have something wrong with your setup (gas, buffer weight, etc). Not one of my AR rifles has issues with sticking cases.
I would:
Ensure you have adequate gas (stove pipes). With an intermediate gas system on the 16", there is a chance you could be under gassed.
Check head space (light strikes, stuck cases).
Check extractor for correct engagement on the case lip. (stove pipes, improper extraction). Make certain the edges are not too sharp and hanging up the case.
I would:
Ensure you have adequate gas (stove pipes). With an intermediate gas system on the 16", there is a chance you could be under gassed.
Check head space (light strikes, stuck cases).
Check extractor for correct engagement on the case lip. (stove pipes, improper extraction). Make certain the edges are not too sharp and hanging up the case.
If it's true that we are here to help others, then what exactly are the others here for?