03-29-2011, 04:07 AM
***Sold***
It is very good to see this forum back up again! I was on the original forum and missed it when it went away. Hopefully this one is here forever---great place! Forgive the low post count....
![[Image: P2200001.jpg]](http://i320.photobucket.com/albums/nn346/gunguyshots/P2200001.jpg)
I purchased in 2009 a Hunter upper. I added a JP/VTAC rifle length forearm to it and have only shot it about 140 rounds. I decided to build a 16" Grendel and took the upper apart. I am posting for sale the barrel, bolt, gas block which has 2 pins, and gas tube. The muzzle is not threaded. Color is black. Rifle length gas system.
As depicted in the pictures the bolt, barrel, and picatinny gas block were all from AA. It has also been thoroughly cleaned after each range trip, which has been about 4 times. This barrel did have the triangle handguard cap and handguards but that was removed when I installed the JP/VTAC and has never been fired rapidly or had pressure put on the barrel from anything other than gravity. I took care of this weapon but now I want to build something slightly shorter for hunting as a 19.5" barreled gun will be unwieldy in my area, and I will order a forum barrel and bolt if they're still around anytime after this hopefully sells, hopefully....
I ran some Sierra 107s, Hornady Amax 123s, and some Wolf. The Wolf printed worst at about 1.25" at 100yds for 5 shots. I'm certain someone could coax more accuracy from this weapon than I could. No reloaded rounds have been shot from this gun.
$325 shipped CONUS. Response of "I'll take it" and sending me an IM for payment instructions. Payment is via PayPal gift---no mention of firearm parts---or USPS Money Order. I ship the following day of receiving payment. Thanks for looking, and God bless.
***SOLD***
It is very good to see this forum back up again! I was on the original forum and missed it when it went away. Hopefully this one is here forever---great place! Forgive the low post count....
I purchased in 2009 a Hunter upper. I added a JP/VTAC rifle length forearm to it and have only shot it about 140 rounds. I decided to build a 16" Grendel and took the upper apart. I am posting for sale the barrel, bolt, gas block which has 2 pins, and gas tube. The muzzle is not threaded. Color is black. Rifle length gas system.
As depicted in the pictures the bolt, barrel, and picatinny gas block were all from AA. It has also been thoroughly cleaned after each range trip, which has been about 4 times. This barrel did have the triangle handguard cap and handguards but that was removed when I installed the JP/VTAC and has never been fired rapidly or had pressure put on the barrel from anything other than gravity. I took care of this weapon but now I want to build something slightly shorter for hunting as a 19.5" barreled gun will be unwieldy in my area, and I will order a forum barrel and bolt if they're still around anytime after this hopefully sells, hopefully....
I ran some Sierra 107s, Hornady Amax 123s, and some Wolf. The Wolf printed worst at about 1.25" at 100yds for 5 shots. I'm certain someone could coax more accuracy from this weapon than I could. No reloaded rounds have been shot from this gun.
$325 shipped CONUS. Response of "I'll take it" and sending me an IM for payment instructions. Payment is via PayPal gift---no mention of firearm parts---or USPS Money Order. I ship the following day of receiving payment. Thanks for looking, and God bless.
***SOLD***