12-19-2014, 01:35 PM
I should get my rail in today, that will allow me to put my new blaster together this weekend. I just want to make sure I am understand everybody here. I plan on bedding the barrel to the upper and the gas block to the barrel. Are you all using red loctite on the barrel/upper junction and blue on the gas block?
Parts:
-Bushmaster lower
-DPMS lpk w/Geiselle g2s-enhanced and Seekins mag release button
-Houge grip
-PRS stock
-Lilja 18" (318 or 319 can't remember)
-Bushmaster v-match upper
-YHM low pro .750 GB
-YHM gas tube
- Nordic 15" ff tube
I am going to wait a bit and be pretty picky while acquiring parts for my Lilja ar24 build, open to suggestions. The only parts I have decided on for sure is one of Mark's 6.5 h lowers and a Diamond head 15" VRS rail
Parts:
-Bushmaster lower
-DPMS lpk w/Geiselle g2s-enhanced and Seekins mag release button
-Houge grip
-PRS stock
-Lilja 18" (318 or 319 can't remember)
-Bushmaster v-match upper
-YHM low pro .750 GB
-YHM gas tube
- Nordic 15" ff tube
I am going to wait a bit and be pretty picky while acquiring parts for my Lilja ar24 build, open to suggestions. The only parts I have decided on for sure is one of Mark's 6.5 h lowers and a Diamond head 15" VRS rail