Marking the BCG??

[JJ_BPK]

My little family is growing. I now have a BCG for my 5.56, Beowulf, in process Grendel & in the parts bin 7.62x39. I have two lowers and of course separate uppers for each cal.

I want a simple but permanent way to mark the bolt & carrier as sets. I know the carriers are interchangeable, but I don't want to take them apart to eye-ball the bolt.

I'm thinking I drag out the dremel and scribe caliber on each.

Suggestions??

[motoxxx_ryder]

Look into laser engraving, they should be able to do something easily on the BCG so you can even verify when viewing through the port. its a bit pricy but it will look clean and be extremely effective.

http://www.artatarms.com/pricing.html

a review on his work
http://www.sincityprecision.com/?p=3972

[am4966]

Yes laser work on the Bolt Carrier and bolt. Companies that I'd personally look at

http://www.microlaserwelding.net

http://www.leoarmory.com

[JJ_BPK]

Thanks for the replies.
The carrier & dust cover in obvious, but the bolt.
Where do you make the bolt and avoid ware??

[ATTACH=CONFIG]6320[/ATTACH][ATTACH=CONFIG]6321[/ATTACH]

JJ