savage 10 FCM 7.62x39 conversion to 6.5 Grendel

[tango29]

Just purchase a Savage 10 FCM for conversion to a grendel. Does the hoard have any recommendations for components for the conversion or gunsmiths that can do the work.

1. Barrel maker - preferably cut rifled
2. Stock
3 scope mounts / rings
4. muzzle break
5. Recommended powder for bolt gun
6. Primers

[zbay]

here are some stocks that might fit the bill, I really liked the hs precision stocks I've used.

https://www.hsprecision.com/shop2/catalo...age+stocks

http://www.mcmfamily.com/mcmillan-stocks...st.php#baf

[NugginFutz]

I know it is not a cut barrel, but BHW makes a savage drop in, chambered in .264 LBC, Polygonal. Those are shooters.

[BjornF16]

Just purchase a Savage 10 FCM for conversion to a grendel. Does the hoard have any recommendations for components for the conversion or gunsmiths that can do the work.

1. Barrel maker - preferably cut rifled
2. Stock
3 scope mounts / rings
4. muzzle break
5. Recommended powder for bolt gun
6. Primers

I've done this conversion...http://www.65grendel.com/forum/showthrea...el-project

1. Pac-Nor "super match" barrel, button rifled, "Grendel Match" (.295" neck)
2. I kept the AccuStock...works fine
3. User preference; I used Talley Lightweight rings
4. No brake required...can shoot all day long
5. Depends upon what bullet you go with...right now I've using CFE223
6. CCI 450

[hm2 clark]

I put theses on a Remington 700 Grendel and like them (1) Pac-Nor barrel mine is fluted. (.295). (2) Could have kept the same stock (3) I also like my lightweight Talley rings. Maybe consider a tactical bolt handle

[Rambozo]

Of course I'll plug my own part here.
http://centarmachine.com

[txgunner00]

http://northlandshooterssupply.com/match...e-barrels/

Give these guys a call. I don't know if they do Grendel but a couple of my shooting buddies have other calibers from them and are very happy.

[Trapper]

I have dealt with Jom @ Apache Gun Works and he is reasonable and very good at making barrels for the average guys that don't have a ton of money for a big name barrel. Everyone seems to love the barrel they have, and have their own opinion. Here's mine Jim is making a 6mmBR for me now and a .20 Practical drop in for my AR15. He will make a 6.5 Grendel caliber for you to your exact length in chrome moly or stainless. http://apachegunworks.com/index.html 318-201-0197

[Rambozo]

I have dealt with Jom @ Apache Gun Works and he is reasonable and very good at making barrels for the average guys that don't have a ton of money for a big name barrel. Everyone seems to love the barrel they have, and have their own opinion. Here's mine Jim is making a 6mmBR for me now and a .20 Practical drop in for my AR15. He will make a 6.5 Grendel caliber for you to your exact length in chrome moly or stainless. http://apachegunworks.com/index.html 318-201-0197

I don't doubt it. I know people who might say this or that about particular blanks, but I have no problem with Green Mountain barrels. I've used a couple of them (.6br, .308), and I've run into a guy that had a really nice .22br with one (short super heavy profile). His rifle shot just fine, as did all the few I have experience with. My father and I are currently putting a 12 twist stainless .308 Green Mountain on my Ruger 77 MK2. In fact, I prefer Green Mountain to Shilen. My father has a Krieger blank that's been sitting around, because he has yet felt the need to replace his Green Mountain.

[PrecisionFirearms]

If you want True match - We would consider doing it with a Bartlein barrel. We have done it before but with Remington 700's.

[KentuckyBuddha]

If you want True match - We would consider doing it with a Bartlein barrel. We have done it before but with Remington 700's.

At what price-point?

[PrecisionFirearms]

Depends on what all is required.

Just to rebarrel - with Bartlein Cut Rifled barrel, Threaded, Braked in polished Stainless - 695.00

Precision Firearms

[KentuckyBuddha]

Cool!

[tango29]

What price point with adding a new stock with integral cheek piece and detachable box magazine and lop system

[PrecisionFirearms]

Sorry LOP??

[bwaites]

Sorry LOP??

Length of Pull. I'm assuming he wants an adjustable stock length.

[tango29]

That would be correct.