Help with the right chamber

[rabiddawg]

Only thing I can emagin that would be more and still fit the 527 action would be the Grendel max.

Enlighten me please. What ya thinking would do better with the 6ppc bolt face & fit a mini action other than a Grendel or a Grendel slightly modified? 6.5 Ackly ppc Max?

I think I will just let you figure out what "more" means.

[rabiddawg]

Only thing I can emagin that would be more and still fit the 527 action would be the Grendel max.

Enlighten me please. What ya thinking would do better with the 6ppc bolt face & fit a mini action other than a Grendel or a Grendel slightly modified? 6.5 Ackly ppc Max?

First of all, the Grendel offers me EVERYTHING (caps =emphasis not yelling) I need in a cartridge of this class. Plus, Luke (the op)stated he didn't want to go Grendel max.

If I want or need more I would SIMPLY jump to a 6.5 creedmore.

[Von Gruff]

Hey Von Gruff I'm interested to know how you altered the mag. And is the zastava mags similar to the CZ 527 mags

The mags a very different as mentioned above.
My Mini Mauser went from this


This was a mock-up trial for the mag which gives plenty of room for the 2.405 COAL Grendel Max

[luke79]

Good to know on the 123gr pills them staying supersonic out to a 1000 at 2550fps I believe I can achieve that no problem. And that is all I'm striving for truthfully is just a good load that will stay together to the 1000 yard line. I'm hoping it can push the 130s to there as well because I really like the JLKs they are great bullets but I'll always have the 123s. My altitude could vary some anywhere from 600 up to 1000 but I'm sure that's not enough different I wouldn't think it would have to much effect from one to the other. I appreciate all the Input guys. Have any of you guys had many dealings with CFE 223 in your grendels many claim it's the go to powder for the highest velocities.

[LRRPF52]

I was just shooting my 31.2gr CFE/123gr AMAX load from 200-1000yds this weekend at my DM Course.

It's boringly accurate and effective from a 17.6" Lilja 1/8 barrel for me, but I was at 6600 ft elevation at 50-58 F. Wind was changing a lot, but I was still hitting a small silhouette at 1000yds like it was cool. First hit on it was a center forehead shot.

I shot a group on the large 1000yd gong so small, I can't even believe it when reviewing the photos. I rapid-fired 6 or 7 rounds at the gong, without being able to see my impacts, just heard them. I popped off the first, heard a register, then another...same thing, let 4 or 5 more fly as fast as I could get a solid reticle into my wind hold and break the trigger..."Ding ding ding ding ding"

I figured it wasn't much to be impressed with because the gong is the size of a barnyard door. When we policed up, I made the range cold and drove down to the targets...

The 12 o'clock group is from a buddy's SR25 shooting 178gr AMAX. Mine is 2 o'clock.





I then moved to a small white silhouette. 1st round went just off the shoulder, next one connected dead center of the forehead. I took off .2 Mils and let another 6 or so fly.

[luke79]

Thanks LRRPF52 that's some great shooting no doubt. Good to hear the CFE 223 is that accurate I've had great luck with it myself out of my 308. I'm planning on just going straight with it in my grendel it seems like it's the perfect powder for stretching these out. Thanks again and keep up the good groups.

[SDguy]

The CZ being a true controlled round feed rifle it has to be cycled through the removable 5 round mag so you are limited to mag length rounds even if you throated it longer that would just provide more freebore. The Zastava uses a mag more like the 98 Mauser so it can be modified more for a little longer cartridges like Von Gruff stated. Or at least that is what I observed when comparing the 2 before I choose the CZ for my build.

The CZ 527 does surprisingly well single feeding through the mag or otherwise. There are a few slight modifications that can be made to the extractor that I highly recommend that make the CZ a little more accurate and a little more reliable as a single round feeder. Shoot me a PM if you are interested in knowing more.

CZ offers a single shot follower that works very well for the 17 fireball and 22 hornet. They also offer a single shot follower for the 7.62 x 39 that I venture a educated guess may work very well.

http://shop.cz-usa.com/ProductDetail/198...527-762x39