+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Troubleshooting (https://65grendel.com/forumdisplay.php?fid=15)
+--- Thread: Bore Guide? (/showthread.php?tid=13197)
Bore Guide? - Hafast - 04-17-2017
Is there a bore guide for the AR15 Grendel other than the $37 one from Satern? Kinda spendy.
Bore Guide? - VASCAR2 - 04-17-2017
I bought my bore guide from Brownell's.
I'm using a Dewey bore guide I bought for my 5.56/223 AR-15 but works for my 6.5 Grendel. I also use a Dewey cleaning rod.
http://www.brownells.com/gun-cleaning-chemicals/cleaning-rods-amp-accessories/cleaning-rod-guides/ar-15-m16-308-ar-cleaning-rod-guide-prod5632.aspx
Bore Guide? - SG4247 - 04-17-2017
Same here, I just use a std AR-15 guide.
Bore Guide? - ricsmall - 04-17-2017
Check to see if Sinclair still makes one. It's delrin with o rings and fits good. I paid $16 for mine. These other guys give good advice as well
Richard
Bore Guide? - Rickc - 04-17-2017
SG4247 Wrote:Same here, I just use a std AR-15 guide.
How do you get a 6.5 cleaning jag or brush through a .22 caliber bore guide?
Bore Guide? - VASCAR2 - 04-17-2017
When I bought my Dewey bore guide over 10 years ago I'm not sure Dewey sold specific bore guides for specific calibers. I just measured the hole through my Dewey Bore Guide and it is very close to 3/8 inch or a little over 9 MM. I bought my Dewey bore guide because it was advertised to work with AR-15's. I like Dewey cleaning rods so I bought their bore guide.
Might be worth a call to Brownell's tech help line or buy a 30 caliber or 6.8/.277 bore guide.