New 6.5 Grendel Magazines Now Here

[Drifter]

I'd like a mag that holds about 14-15 round in a mag that is the size of a 5.56 20 rounder. I use my CP & ASC 10 rounders and the mags which look like 20's the most.

Link: http://www.ammosc.com/6-5-grendel-15-rd-magazine/

[VASCAR2]

I've got a couple of the ASC and C Products 15 rounders and they have been reliable so far but I rarely load more than 10. I think the ASC are better made than my original C Products. If the E Landers end up being the best magazines for the 6.5 Grendel I'll probably buy some. I'm just waiting to see how the E Landers work over a reasonable amount of time.

[NugginFutz]

I took mine to the range and stuffed them with 25 apiece. They fit under the rifle with just about an inches worth of clearance with my Harris 6-8" bipod, and monopod on my PRS stock. I have to roll the rifle for mag changes, but I can easily live with that.

[ATTACH=CONFIG]5445[/ATTACH]

All mags fed perfectly, with no issues.

I am quite pleased.

[Variable]

OK, so maybe it's MY memory that's gone all to hell?

Aha! Finally found one, well, a shorter one anyway... I didn't have time to dig deep enough through the trove, but this did shake loose near the edge of a pile:

Jog any memories?







I think that one is a 5 or 10 rounder (didn't try it) that came with my 19.5" AA back in the "old" days.LOL

The 20 rounder sized ones (17 actual) were the same but just a bit longer.

Of note is that they are only joined and welded on the rear. They only have one seam. I have absolutely no clue who made them. The floor plate is sterile as well. Bill A. would know though.

P.S. The board is getting weird today. I keep getting random "Database error" returns
stating "The database has encountered a problem.", and now it seems to have changed the number of emoticons/pics that can be used as well.

[bwaites]

Aha! Finally found one, well, a shorter one anyway... I didn't have time to dig deep enough through the trove, but this did shake loose near the edge of a pile:

Jog any memories?







I think that one is a 5 or 10 rounder (didn't try it) that came with my 19.5" AA back in the "old" days.LOL

The 20 rounder sized ones (17 actual) were the same but just a bit longer.

Of note is that they are only joined and welded on the rear. They only have one seam. I have absolutely no clue who made them. The floor plate is sterile as well. Bill A. would know though.

P.S. The board is getting weird today. I keep getting random "Database error" returns
stating "The database has encountered a problem.", and now it seems to have changed the number of emoticons/pics that can be used as well.

I have some like that as well. If I remember right, they were an early CProducts (?) version. Notice how few ribs there are? Mine work well, but not all of them did. I have 10s and 15's. They are quite a bit thicker than the eventual production CProducts mags. 2 of them are from my original purchase and first Grendel. The others all within a year of that, say 2006 or so?

[Variable]

That sounds about right Bill. Thanks for the confirmative info.

I know form should follow function and not fashion (Duh!), but I'd really like to see straight 15 round mags from Elander next. If they can make straight ones about the size of a 5.56 20 rounder that function flawlessly they'd be a great seller.

The curved 15/20 rounders just "look" so dang odd. We all grew up with straight 20's, so that is what they are "supposed" to look like.

[stanc]

Aha! Finally found one, well, a shorter one anyway... I didn't have time to dig deep enough through the trove, but this did shake loose near the edge of a pile:

Jog any memories?

Yeah, that's what I was talking about! Like you said, the 17-rounder looked very much like a mini M14 20-rd magazine. Glad to see my memory ain't completely shot. (Yet.)

P.S. The board is getting weird today. I keep getting random "Database error" returns stating "The database has encountered a problem."

Me, too. Maybe those Russki hackers hit this forum? :eek:

[stanc]

I know form should follow function and not fashion (Duh!), but I'd really like to see straight 15 round mags from Elander next. If they can make straight ones about the size of a 5.56 20 rounder that function flawlessly they'd be a great seller.

The curved 15/20 rounders just "look" so dang odd. We all grew up with straight 20's, so that is what they are "supposed" to look like.

I couldn't agree more!

[taggor]

I took mine to the range and stuffed them with 25 apiece. They fit under the rifle with just about an inches worth of clearance with my Harris 6-8" bipod, and monopod on my PRS stock. I have to roll the rifle for mag changes, but I can easily live with that.

[ATTACH=CONFIG]5445[/ATTACH]

All mags fed perfectly, with no issues.

I am quite pleased.

Do the rounds rattle in your magazines when loaded to 25?



Sorry moderators remove if it should go into the Troubleshooting forum.

[NugginFutz]

Do the rounds rattle in your magazines when loaded to 25?



Sorry moderators remove if it should go into the Troubleshooting forum.

At 25, 23, 21, etc. down to about 9 yes. At 24, 22, 20, etc. no.

All mine rattle a bit with an odd # of rounds from about 9 and up. Even #'s never rattle. Must have something to do with the way the followers align with alternating stack pressure.

Doesn't bother me, as this is not my TAC weapon.

[taggor]

At 25, 23, 21, etc. down to about 9 yes. At 24, 22, 20, etc. no.

All mine rattle a bit with an odd # of rounds from about 9 and up. Even #'s never rattle. Must have something to do with the way the followers align with alternating stack pressure.

Doesn't bother me, as this is not my TAC weapon.

Thanks for the follow up. Mine rattled @ 20. I just didn't know if this should be considered "normal" behavior for the new magazines. I know they did with the old ones (C-Prod / AEC). I think I was expecting this to be addressed with the new ones.

Any other questions will go to the troubleshooting section.