Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
refurbishing my last build for lighter weight, well kinda
#1
Ok so i'll start by listing my present setup, then list my new one.

DPMS lo pro upper
Satern custom profiled mk12 barrel in 6.5G
DPMS BCarrier
Schuler muzzlebrake
Heavybuffers.com buffer
Wolff buffer spring
Jp trigger springs
Ace arfx stock
MOE grip
YHM diamond rifle length hand guard
Bushnell Elite 10x with Nikon 1 piece mount
Reply
#2
New setup

Same barrel
Same upper (debating the extra weight and weather to go side charger)
Trying to decide on brake
Debating NiBo bolt carrier (not bolt of course)
Debating the buttstock
Grip is up for debate
Trigger, need recommendations (like CMC)
Fortis 12" cerakoted fde
Vortex 4-16x50FFP moa ebr reticle
Larue 104 qd mount. (looked closely at ADM, bobro and a few others)
Vtac sling (multicam)


So I added a bunch of weight on optics and lost some in the rail, my optional optic for close up work is an aimpoint pro.
Reply
#3
So.... I guess I'm looking to improve things any way I can before I put it all in a pelican or storm case. I do plan on setting it up for both optics and when I use the aimpoint ill most likely have a pvs14 on it.
Reply
#4
Nice...

A big chunk of weight is the barrel, followed as you say by the scope. I am not sure cutting anything else is going to offset their weight. Certainly not to a degree you will notice.

Maybe carry fewer rounds in the magazine on long walks but the AR is already a pretty light platform for a gun.
Reply
#5
Kinda funny, only carry 2, 5rnd mags on my body usually 4 more in a pack in the vehicle. Part of the time that vehicle is a 4 wheel scooter because of my injuries. In the future I may be in a wheelchair or scooter full time. I have 17 adversely affected discs (4 replaced by titanium and cadaver bone) in my back from being ejected from a helo in eastern Afghanistan. I also have a pair of bad knees and a blown rotator cuff.

On the lighter side, I know that the update won't affect much in weight but it will upgrade the overall capabilities of the rifle. The only things I regret about the rifle is the heavy receiver and not getting the barrel fluted or carbon wrapped.
Reply
#6
can save a couple more ounces with a different hand guard… http://www.bravocompanyusa.com/BCM-KMR13...-kmr13.htm
Reply
#7
Saw that one, would save almost 12 oz. Because they are not available yet, bcm said 2nd quarter this year. I thought about waiting but the Fortis is sexy and lighter than the lancer one I was going to buy originally.
Reply
#8
Thought about an AP Custom CF hand guard? Can always get it cerekoted.
Reply
#9
Couldn't find one with the rail on the top...The rail is needed for my illuminator and
my HD video camera (sony)
Reply
#10
Couldn't find one with the rail on the top...The rail is needed for my illuminator and
my HD video camera (sony)
Reply
#11
The Tactical version has the top rail http://nordiccomp.com/retail/shop/ap-cus...andguards/
Reply
#12
Yep but when I looked, nobody had them in stock. I spoke with them and I guess they are moving on to the gator series, I'm still waiting for the info from them about it.
Reply
#13
Doesn't say out of stock, might be worth calling….

http://www.mountsplus.com/AR-15_Accessor...F-R-T.html
Reply
#14
Already bought the Fortis but might look into it for my 556 rifle with another way too heavy barrel
Reply
#15
Mounts plus is not too far from me, might call them tomorrow.

Anyone know if the mega side chargers are lighter than my dpms lo pro
Reply
#16
Might look into the mega upper vs the dpms I already use, mega is lighter I think, the dpms weighs a ton and easily underestimated until people see it.
Reply
#17
Quality arms is making an ambidextrous side charge upper now and offering a discounted price to forum members. I'm not sure what they weigh though.
"Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Reply
#18
http://www.qualityarms.net/side-charger-left

400 is a little steep, not sure but I don't even see a carrier for the price. Please of someone has any info or pictures lmk... or pm me, I want left charger because that's what is faster to clear. I like side charge so Jams can be cleared quicker and so the rifle can be charged faster
Reply
#19
I think for the horde it's $350 with carrier. I don't know about bolt. There's an entire thread devoted to it.
"Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Reply
#20
Yeah looks like they arent providing a bolt, less attractive when theres no bolt. Nibo bcgs can be found for 110-150 and a good upper for less than 100. So adding the fixed handle that snags on everything and keeps it from sitting in the pelican correctly is an extra $200... ambi isnt needed for most shooters anyway especially if they are just hunting. Unless they are a lefty with ocd... my whole career I didnt have ambi controls and was even wounded in my right arm once, fired left handed after that.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)