Posts: 1,143
Threads: 51
Joined: May 2012
12-13-2013, 07:14 AM
(This post was last modified: 12-13-2013, 08:15 AM by mongoosesnipe.)
came across a deal on another forum and had to pick it up
![[Image: IMAG1757_zpsf58ae944.jpg]](http://i1237.photobucket.com/albums/ff473/mongoosesnipe/IMAG1757_zpsf58ae944.jpg)
douglas xx air guaged 6.5 barrel full bull profile... now i need to get an action and pick a chambering.... anybody got a chamber reamer they want to loan me..
Punctuation is for the weak....
What twist, and what action are you putting it on?
Posts: 1,143
Threads: 51
Joined: May 2012
Barrel is a 1in9 I believe but have not yet verified, as far as the action goes I am starting from scratch and though I would love to get a stiller or a panda action I don't really want to spend 1300 on the action of this impulse buy that said I am tempted to use a surplus springfield action since they are so cheap... Any recommendations would be appreciated
Punctuation is for the weak....
So it will be on a bolt gun then.
Posts: 1,827
Threads: 111
Joined: Jun 2011
What's the length of the barrel?
LIFE member: NRA, TSRA, SAF, GOA
Defend the Constitution and our 2A Rights!
Posts: 1,143
Threads: 51
Joined: May 2012
yes a bolt gun,it would be quite an undertaking to make an ar barrel from it
the barrel is 29 inches in the raw, according to douglas the front 1.5 inches will need to be removed so finished length will be around 27 max
Punctuation is for the weak....
Posts: 1,827
Threads: 111
Joined: Jun 2011
6.5 SAUM...25". See
http://forum.snipershide.com/snipers-hid...-saum.html
Are Douglas barrels cut rifled or button pulled?
LIFE member: NRA, TSRA, SAF, GOA
Defend the Constitution and our 2A Rights!
Posts: 1,143
Threads: 51
Joined: May 2012
BjornF16 Wrote:6.5 SAUM...25". See http://forum.snipershide.com/snipers-hid...-saum.html
Are Douglas barrels cut rifled or button pulled?
Douglas barrels are button rifled
Unfortionatly I do not have anywhere where I can shoot far enough to justify building a 6.5 SAUM, I was thinking more along the lines of doing a benchrest Grendel and leaving the barrel fat, that or maybe a 6.5x47 lapua or 260 remington nothing to exciting or extreme
Punctuation is for the weak....
In that case go the 6.5 Lapua.
I took one of mine out today and was splitting rabbit sized rocks on call from 400 to 600m without a problem. The wind was a bit squirrelly, but once I was able to spot the mirage sweet spot I could adjust for the wind.
123gn bullet, 38.5 to 39gn of Varget and you are into a fine accuracy point.
Posts: 39
Threads: 5
Joined: Nov 2011
You could try a 260 AI if you want a little more punch with a short action.
Posts: 1,143
Threads: 51
Joined: May 2012
I am not yet confined to an action so anything goes as far as length
Punctuation is for the weak....
You could go with a 6.5 x 55 Mauser. It's the "do everything well 6.5" Lots of cheap actions around. Lots of cheap brass and for that matter ammo around. Accurate. Older shooters will show you more respect, younger ones will be intrigued.