Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sierra 120 Tipped Gameking
#61
Congrats on your doe. Is yours the first deer on the forum taken with the 120 Game Changer?
Reply
#62
Thank you. I'm not sure if it is. If others have taken game with it I would love to hear their thoughts on it.
Reply
#63
Congrats Timitus! Good clean kill is always nice. Thanks for the post. Now I have a little more confidence changing to a new round for whitetail. One more week before I can test it on game.
Reply
#64
Thanks for the updates! and the necro.
Nice shootin'.
"Down the floor, out the door, Go Brandon Go!!!!!"
Reply
#65
Thanks everyone. Let's keep this going with more results from the field and range results. I need to fine tune the load I was using. I believe this bullet has greater accuracy potential then my 5/8ths group.
Reply
#66
Dropped 3 pigs with them. Drt. Looks like it works.
Reply
#67
Nice job on the pigs. What was your load?
Reply
#68
Nice update Timitus. I'm hoping to get a good enough load put together to get some hunting done with the new bullet the weekend after Thanksgiving.
Reply
#69
Timitus Wrote:Nice job on the pigs. What was your load?
Two guns tac and 8208 bullet is pretty easy to get to shoot half and 3 quarters of an inch. Getting the about 15 20 fps more than the 120 mk.
Reply
#70
kalcolt45auto Wrote:Two guns tac and 8208 bullet is pretty easy to get to shoot half and 3 quarters of an inch. Getting the about 15 20 fps more than the 120 mk.

Nice. Is your COAL for the bullet long or short?
Reply
#71
This is probably a stupid question, but are these lead core bullets? The cross section I've seen look so, and there is nothing about lead free on the Sierra site, so I suspect so...

I was looking around last night but could only find the 130 grain. I'll only buy copper bullets from now on, however, so that takes me back to my original stupid question, are these lead core bullets?

KW
From my cold dead endmill...
Reply
#72
Konocti's Wigwam Wrote:This is probably a stupid question, but are these lead core bullets?

I think ths GameChanger is the same bullet - TGK. This description is under the Tipped GameKing heading. Could be wrong though.

Quote:GameChanger (TGK) Bullets: These are hunting bullets with the perfect combination of Sierra’s legendary match accuracy coupled with deadly penetration. Sierra re-engineered their legendary MatchKing bullet into a hollow point design for quick expansion and fitted it with a transparent green tip for ballistic uniformity. Inside, the GameChanger features a unique construction that utlilizes a special lead alloy surrounded by a tough copper jacket that delivers excellent penetration and expansion at a variety of ranges.
Reply
#73
jasper2408 Wrote:I think ths GameChanger is the same bullet - TGK. This description is under the Tipped GameKing heading. Could be wrong though.

For some reason I thought the TGK was a copper bullet, but blow that out the window. "special lead alloy" doesn't sound so.

Thanks,
KW
From my cold dead endmill...
Reply
#74
Timitus Wrote:Nice. Is your COAL for the bullet long or short?
2.260 I started at mag length for the ar but 2.260 tightened everything up.
Reply
#75
kalcolt45auto Wrote:2.260 I started at mag length for the ar but 2.260 tightened everything up.

Thanks. So these might like a bigger jump to the lands.
Reply
#76
I got a 2.356-2.358" OAL in my Howa. Translates to 1.773" CBTO for the bullet. That was longer than the 123 ELD-M and Berger 130 but a bit shorter than the 105 Blitz and 130 TGK.
Reply
#77
Timitus Wrote:Thanks. So these might like a bigger jump to the lands.

I don't think they care much honestly it's a gas gun never checked lands on this bullet just know I would be jumping from finding lands from other bullets.
Reply
#78
I loaded and shot some of these in my Howa mini 22" today. Powders:
8208: 26.6, 27.0, 27.4
N540: 28.5, 29.0
SWMR: 30.8, 31.4 (flattened primers - higher velocity - too hot)
LVR: 30.6, 31.0, 31.4

Of note were N540 and LVR for accuracy and good velocity. SWMR was too hot giving me velocities of 2619 and 2648 ave. The N540 and LVR were both in the mid 2550s with MOA accuracy and no pressure signs.

[ATTACH=CONFIG]20072[/ATTACH]


Attached Files
.png   120TGK.png (Size: 261.23 KB / Downloads: 21)
Reply
#79
stonehog Wrote:I loaded and shot some of these in my Howa mini 22" today. Powders:
8208: 26.6, 27.0, 27.4
N540: 28.5, 29.0
SWMR: 30.8, 31.4 (flattened primers - higher velocity - too hot)
LVR: 30.6, 31.0, 31.4

Of note were N540 and LVR for accuracy and good velocity. SWMR was too hot giving me velocities of 2619 and 2648 ave. The N540 and LVR were both in the mid 2550s with MOA accuracy and no pressure signs.

[ATTACH=CONFIG]20072[/ATTACH]

Thanks for the update. I might give LVR a shot. I have a pound of it. What was your COAL?
Reply
#80
[ATTACH=CONFIG]20077[/ATTACH]

Here is what I'm starting with for a quick hunting load.
28.8 grains of TAC (Sierra Max Load), Federal GM Match AR primers, Hornady Brass @ ~2.270"

Out of an 18" AR, this group averaged 2425 fps. I worked up to this one in about 70 degree weather. No signs of pressure and this one really tightened up compared to my others, but I was also feeling a bit off due to a large amount of wind which calmed down slightly during this group.

I'm loading 10 for a hunting trip next weekend to have some for testing terminal performance if the opportunity presents itself, but I don't want to load too many as I'd like to experiment with some more rounds to ensure that I didn't just get lucky with this group.


Attached Files
.jpg   120TGK TAC.jpg (Size: 184.19 KB / Downloads: 14)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)