Howa 1500 mini action scope rail?

[igotta40]

I just received my heavy barrel 6.5 Grendel Howa, so I need a scope base. I’m looking for a one piece Picatinny rail. Is this a one of a kind item?

[Old Bob]

I use two-piece bases (same as Remington 700) 'cause the one-piece base crowds the receiver when trying to load one round at a time. Midway USA has one-piece bases. Both 0 & 20MOA elevation.

https://www.midwayusa.com/product/101866350

Outer Impact also has one-piece 20MOA Bases. Never done business with Outer Impact but they look OK to me.

https://outerimpact.com/shop/howa-mini-a...il-20-moa/

[igotta40]

Thanks, I’m going with a one piece rail though because I tend to change my scopes from time to time so I need it to be modular. I thought there might be a crossover from another receiver that I might already have.

[sharp.shooter]

I put a Warne Mountain Tech 20 MOA picatinny rail on mine that I got from Brownells. They also make a 0 MOA rail as well.

[Feral]

https://www.egwguns.com/hd-howa-mini-act...ail-20-moa
Just mounted one of these on my Howa Mini yesterday..
Seems both the 0 & 20 MOA rails are out of stock..

[grayfox]

I've used both the outer impact and the egw. 0 moa's, grendel doesn't need 20 moa boost imo.
I prefer the egw b/c it uses torx screws, outer's AIRC are hex. the torx tighten and loosen better without much chance of stripping, I had a hex set strip on me. there will come a time that you need to take it back off, so.
also, a bit of loktite blue on the screws to ensure they don't come loose on you.

[Harpoon1]

I use two-piece bases (same as Remington 700) 'cause the one-piece base crowds the receiver when trying to load one round at a time. Midway USA has one-piece bases. Both 0 & 20MOA elevation.

https://www.midwayusa.com/product/101866350

Outer Impact also has one-piece 20MOA Bases. Never done business with Outer Impact but they look OK to me.

https://outerimpact.com/shop/howa-mini-a...il-20-moa/

Right on Bob, me too!

I started with the Outer Impact 20 MOA base but hated how hard it was to clear malfunctions and/or get access to the chamber. Switched to the two piece bases and have never looked back!

YMMV!

[HokeyPokeyKid]

Right on Bob, me too!

I started with the Outer Impact 20 MOA base but hated how hard it was to clear malfunctions and/or get access to the chamber. Switched to the two piece bases and have never looked back!

YMMV!

Same story for me, now it's only 2 piece bases or rings.

I started using the Burris "Xtreme Tactical Two Piece Bases" because it makes it easier to single feed and gives plenty of clearance as well as some adjustment for ring placement.

[igotta40]

Thanks for the responses & info. When I have it assembled I’ll post up a picture.

[igotta40]

I found a Outer Impact 0 moa rail for Howa mini, and mounted my Vortex Diamondback Tactical 6-24x50 FFP on Vortex rings. I was disappointed with the rings. They needed a lot of lapping.