Hello All,
Unfortunately I'm getting out of the Grendel game and have a few items for sale. I built the setup about 10 or so years ago and it's been sitting in the safe since then after hunting. It was built for a South Dakota hunt and it harvested 3 antelope and 3 mule deer on the first day out (longest shot was roughly 350 yards). Properly broken in and shot 3/4 MOA with my custom loads. I took it to the range a few times after. Less than 250 rounds through the barrel. All for $600 minus scope. Local sale would be preferable (in Seattle, out of area sales will have to deal with shipping costs for parts including primers and powder unless you don't want them). Not looking to split up at this time. Thanks for looking.
18" SS Lothar Walther match grade bull barrel. 6.5 CSS with the tighter neck. Custom Lapua cycles fine.
LMT nickel plated headspaced bolt through Lothar Walther when barrel was manufactured
VTAC 11.5" free float handguard w/ 75% top rail
PRI gas block with stainless gas tube
CAA SRSNL fully adjustable stock - no leg
6.5 Grendel Redding die set
Roughly 250 Lapua Grendel brass. Most once fired and currently tumbled in SS media. I purchased brand new.
900+ CCI 450 small rifle magnum primers
1lb 8208 XBR
2lb ramshot
2 c products 5 rounds magazines
1 or 2 c products 25 round magazines?
KAHLES 3-9 multizero scope (Optional for an extra $450) mint condition with original paperwork and box
Unfortunately I'm getting out of the Grendel game and have a few items for sale. I built the setup about 10 or so years ago and it's been sitting in the safe since then after hunting. It was built for a South Dakota hunt and it harvested 3 antelope and 3 mule deer on the first day out (longest shot was roughly 350 yards). Properly broken in and shot 3/4 MOA with my custom loads. I took it to the range a few times after. Less than 250 rounds through the barrel. All for $600 minus scope. Local sale would be preferable (in Seattle, out of area sales will have to deal with shipping costs for parts including primers and powder unless you don't want them). Not looking to split up at this time. Thanks for looking.
18" SS Lothar Walther match grade bull barrel. 6.5 CSS with the tighter neck. Custom Lapua cycles fine.
LMT nickel plated headspaced bolt through Lothar Walther when barrel was manufactured
VTAC 11.5" free float handguard w/ 75% top rail
PRI gas block with stainless gas tube
CAA SRSNL fully adjustable stock - no leg
6.5 Grendel Redding die set
Roughly 250 Lapua Grendel brass. Most once fired and currently tumbled in SS media. I purchased brand new.
900+ CCI 450 small rifle magnum primers
1lb 8208 XBR
2lb ramshot
2 c products 5 rounds magazines
1 or 2 c products 25 round magazines?
KAHLES 3-9 multizero scope (Optional for an extra $450) mint condition with original paperwork and box
