30mm rings for CZ Varmint?

[Scout175]

Any advice on quality 30mm rings for a new CZ Varmint. Probably mounting a leupold 42 mm objective lens so Med height. Warne? Leupold? Thanks.

[riuma]

I got Leupolds. They have worked fine~Riuma

[A5BLASTER]

Vortex pro mediums worked with my 4.5x27 midas gen 2.

I think I have burris signature zee rings on it now, have to check when I get back home to be sure. They are medium height as well.

You may need high height rings. I have a dip 25 moa rail on my rifle, so i can get away with medium height rings.

[okiecat]

I run the Zee rings and dip rail. Use these rings so I don’t have to adjust scope out of center. I also have but not tried yet the Larue QD mount. Running these on my AR’s and love them. Not cheap but bullet proof and repeatable.

[Scout175]

Bought some Warne Med rings from rcook10 on this forum. Worked out great with my new Leupold VX-6 HD 3X18X44.

[PVBoom]

Bought some Warne Med rings from rcook10 on this forum. Worked out great with my new Leupold VX-6 HD 3X18X44.

Glad that worked out for you. My answer, which I forgot to post, would have been to get some Talleys. Great lightweight rings.

[Scout175]

Thanks, I have some Talleys on my Kimber and they have worked out well but didn't see any for the CZ at my local shops. I almost bought some Leupolds at the PSA but they were pricier than the Warne's that just happened to show up on this site for sale.

[gldprimr]

Look at Tawnado Airguns, https://www.tawnadoairguns.com/sportsmat...m_17mm.php, TO85

I have a set of the Sportsmatch rings on my Tikka and really like them for what ever that may be worth to you.

[rcook10]

Those turned out great!

[Stinky Coyote]

warne mediums are the lowest you can get from recollection, leupold next best

[Sinclair]

I use a DIP rail under Warne vertical split mediums. Plenty of bolt clearance and V adjustment out to past 1000 yards. Never shot it that far, but with a 100 yd zero, there is enough Mils remaining to get me there. By the way my scope is SWFA 10 x 42 Mil Quad.

When I bought the scope, I called support and was told that each scope is assembled for maximum range of adjustment with the parts available to the tech doing the assembly. So, no guaranties from here.