Hello from another citizen of Marylandistan

[KABOH1100]

Yep... all yawl guessed it. I am a newbie to the 6.5 Grendel. Took me awhile to get here and a few other caliber builds later... but I made it finally... well, sort of... Just about got all my lower puzzle pieces ordered in and ready to assemble... Need to find a complete upper that has the barrel in stock... Jeesh... never knew they were being made of unobtanium. Anywho... I guess a little about myself would be nice. Been shootin' since I could sit on the bench chair and look through the scope. Wish I could say it's been every year since then... but adulting sucks sometimes. Now that I find myself in the graying years and with this lil' bug of a pandemic going on, spare time doesn't seem to be much of an issue now.. So now that I have more of it... I guess I have become somewhat of a shade tree gun smith. Just tweakin' friends stuff as well as my own... Scratch built some stuff for myself.. and starting messing around with reloadin'. I learned early in life to keep alcohol and firearms separated.. So my beer/wine/ and mead making equipment don't hangout with my reloadin' stuff.... they never played nice together and I try to keep em separated.

Oh, and yes, later tonight I'll actually raise a horn of Mead tonight with yawl.

Builds:
(2) 9mm Lugar Glock 17 (the non identical twins)
(1) M4 AR15 5.56/.223 pistol variant
(1) DMR AR10 .308 (aka The Beast)

and hopefully soon (1) 6.5 Grendel.

[ATTACH=CONFIG]17220[/ATTACH]
[ATTACH=CONFIG]17221[/ATTACH]
[ATTACH=CONFIG]17222[/ATTACH]

[mdram]

hiya neigbor, welcome from the lower shore
compass lake says they have 20" douglas grendel barrels in stock

[KABOH1100]

thanks for the heads up... Was looking at a budget build using this

https://sandersarmoryusa.com/product/20-...-assembly/

Pew Pew Tactical did a 5 Best 6.5 Grendel Uppers (Hands-on) https://www.pewpewtactical.com/best-6-5-grendel-uppers/
Figured I'd give them a try to get everything in house and see what it would do and get some range time. Upgrades most likely to follow would be a Failed Zero NiB 6.5 type II BCG,

[mdram]

based on this on their website, i would not buy from them
Where do you get your barrels and parts from?
We do not disclose where we get our barrels or parts for a couple reasons, the most important being it is proprietary information
the only one on the pew pew list i have seen reviews on was grendel hunter. they review well and use satern liberty barrels iirc

remember the barrel is the #1 place to put your money, and not cheap out on
for budget, look at a criterion

[sundowner]

Welcome to the horde from Wisconsin , have a 16" sanders barrel and love it .

[peak98]

Welcome to the horde from just down da bayou! I’d start looking for ammo or reloading components now as things are scarce.
peak98

[Sinclair]

Hello from the Peoples Socialist Republic of Illinois. This is the place for info about the Grendel, ARs in general, and anything shooting.

P.S. I think that Illinois holds the record for the most Govenors in prison at one time, what is Marylandistan's claim to fame?

[VASCAR2]

Welcome to the forum KABOH1100!

[just_john]

Welcome to the clan, K1, from the great nation of Texas! Other than passin' time, what are your goals in these builds? We can always help you spend your "stimulus" check.

[KABOH1100]

Where to start... Like the fact we have to pay and pass a proficiency test to obtain a piece of plastic that lets us try to practice our 2A right (Maryland Handgun Qualification License - HQL), and that after 10 years we have to do it all again. That we need to, according to the MD State Police "Have a good and substantial reason to wear, carry, or transport a handgun, such as finding that the permit is necessary as a reasonable precaution against danger." Self protection is not a good and substantial reason.

[KABOH1100]

Welcome to the horde from just down da bayou! I’d start looking for ammo or reloading components now as things are scarce.
peak98

Tell me about it... I just about scour the internet every day to find something I can use. Things I can't find (or willing to pay double + for) primers, and quality projectiles. Brass I can get most of the time from Capitol Cartridge in Houston TXhttps://www.capitalcartridge.com/default.asp. Powder, depending on manufacturer, I can still get local in limited quantities.

[KABOH1100]

Welcome to the clan, K1, from the great nation of Texas! Other than passin' time, what are your goals in these builds? We can always help you spend your "stimulus" check.

Unfortunately my wife and I do not qualify for a "stimulus" check. My boss did hint at a bonus check. I'll have to see how that pans out.

Goals for build:
(1) start inexpensive and build upon that. Minute of Man for now, Minute of Angle later. (here come the cringes and comments about "pay now / pay later")
(2) the local gun club I belong to, their longest range is 200 yrds.
(3) fun.

Is there a "What have you Built, tell us about" it section?

[Sinclair]

Is there a "What have you Built, tell us about" it section?

Yes, try the Grendel photo forum. Some guys add a description along with the pictures, others just post pictures.

Sorry about the stimulus check thingy. My wife and I have never qualified for any government freebies. Something about not fitting the profile of low information voters.

[A5BLASTER]

Welcome to the horde sir.