Muzzle Device recommendations

[jasper2408]

I would recommend the VG6 stuff. I have the Epsilon on one AR and a Gamma on another(both 5.56) and a Lambda on a bolt gun(6.5 Grendel). I did try a Gamma on my bolt gun but I personally like the Lambda better but that is just my personal preference. The Gamma does look nice on the end of a barrel though. Not too big and it does the job.

Edit: One thing I forgot to mention was that I tried using a jam nut compared to a washer(Accu-Washer) on the Gamma (6.5 Grendel) and I found that the washer was more accurate for me. For some reason the jam nut did not shoot as good for me as the washer did. I checked to see if the brake was loose but it wasn't with the jam nut but it was just spraying the bullets all over the place. Maybe a different load would have worked better but the same load worked fine for the washer mounted version. This was with the Gamma. I have seen on here that others have used a jam nut with success so it could just be my rifle or me. The Lambda works fine and it basically is a jam nut so go figure.

[shermanempire]

Thanks for all the recommendations, I managed to find a vg6 gamma for cheap on gafs so thats what I've gone with. I've also picked up a jam nut but I'll keep an eye out for any accuracy issues and try replacing that first. And also depending on how loud it is I might just end up swapping a linear comp if it suits my needs more.