Posts: 5
Threads: 2
Joined: Aug 2020
My Howa shoots great, is more accurate and eats anything I feed it. Even with Wolf, it still prints minute of heart ventricle. However, after about 5 rounds, it gets severe sticky bolt that would make my Mosin blush. A few rounds or brass to clean the chamber and I can get another few rounds of Wolf, rinse and repeat.
Anyone else have this issue with theirs?
Posts: 3,654
Threads: 17
Joined: Aug 2013
sfmd,
Sticky bolts are a classic sign of over-pressure. Especially if the round went in OK.
Posts: 383
Threads: 15
Joined: Jan 2017
I had the same problem when shooting wolf ammo. I cleaned well and it helped. I think the lacquer builds up. And gets sticky.
"I rarely give a definite answer" - TG
Posts: 223
Threads: 3
Joined: Jun 2018
I don't think it's laquer build up. I shoot cases of Wolf/Barnaul 7.62x39 from bolt guns (CZ's and a Ruger) and have never experienced this. Stop shooting Wolf and see if the problem persists.~Riuma
Posts: 1,238
Threads: 51
Joined: Dec 2017
08-29-2020, 09:45 PM
(This post was last modified: 09-03-2020, 03:01 PM by Harpoon1.)
Troutguide Wrote:I had the same problem when shooting wolf ammo. I cleaned well and it helped. I think the lacquer builds up. And gets sticky.
+1
Never had the problem with the Grendel, mostly because I dont shoot much Steel Wolf, but I see it often with the 7.62x39 lacquered/poly coated Russian steel ammo.
Posts: 8
Threads: 1
Joined: Oct 2019
fmj Wolf absolutely does not work in our Howa. Bolt is so sticky I can barely open it and my kids aren't strong enough to do. So we just don't shoot Wolf. No problem with any other ammo that we've tried.