Howa mini magazine 7 shot

[Stevil]

A fellow forum member took the time to examine and successfully modify my stock 5 shot magazine into a 7 shot. Magazine was tested and it works 100% reliably.

5 shot magazine will now be modified to be flush fitting still with 5 shot capacity.

https://youtu.be/hdFLiIcaKXg

[A5BLASTER]

I tryed the flush fit mag with 5 rounds couldn't make it work properly.

Cut down everything I could cut and trim down. Could get 5 rounds in it but couldn't make it feed properly.

Same trim job done to internal parts of a 5 round mag allows 7 rounds like in your vid.

Now my flush fit mag does work perfectly as a 4+1 mag set up.

[Stevil]

yeah internal trim job like your conversion A5BLASTER , cant remember but did you thin out your mag follower also ?

[A5BLASTER]

yeah internal trim job like your conversion A5BLASTER , cant remember but did you thin out your mag follower also ?

Yes I trimmed out everything from the follower and the spring retaining plate that could be cut or trimmed off.

[stacy]

A5blaster did your trim the magizine lips at all seems like my mag the rounds are to deep in the mag and the bolts rides over the last round and the frist round

[A5BLASTER]

A5blaster did your trim the magizine lips at all seems like my mag the rounds are to deep in the mag and the bolts rides over the last round and the frist round

No sure didnt. Sounds like you have a inlet problem with your bottom plastic/metal. The mags aren't inserting deep enough is what it sounds like.

[JSH]

As many people that want magazines of various lengths, then the crazy high price. Someone with a 3D printer i would think could whip some out pretty quick?

[stacy]

Thanks just cut my mag down 2 flush mount 3rds and it feeds the first two rds and rides over the last one

[stacy]

Thanks