Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result
#21
Good shooting.Once you find the bullet and load it likes.And that may take you some time.It will easily be a sub moa shooter.You’re not far now.
Reply
#22
Jimla I have heard that cfe223 is very temp sensitive have you found this to be true with your testing ?
Reply
#23
Scrape hunter Wrote:Jimla I have heard that cfe223 is very temp sensitive have you found this to be true with your testing ?

I don't have temp sensitive problems at all in Hawaii, my hunting area and range only changes +/- 10 Degrees year round. CFE223 is know to be temperature sensitive and higher velocities. If you shooting at different temps(cold and hot), I would lose 50-100fps and focus on less sensitive powers like IMR 8208 XBR and AR COMP.
Reply
#24
I got a new lot of CFE223 powder, I tried a 10 shot Satterlee's load development and loaded the previous accurate load.

I was surprised how well 10 shot Satterlee's worked, it found my previous 30.8gr and 31.2gr nodes, see graph. At 30.8 it is at a bottom out in a flat area and at 31.2 it is a flat area with a sight drop of Velocity increasing .1 grains.

[ATTACH=CONFIG]14727[/ATTACH]


Attached Files
.png   Screen Shot 2019-10-02 at 5.42.40 PM.png (Size: 120.62 KB / Downloads: 75)
Reply
#25
Jimla Wrote:I got a new lot of CFE223 powder, I tried a 10 shot Satterlee's load development and loaded the previous accurate load.

I was surprised how well 10 shot Satterlee's worked, it found my previous 30.8gr and 31.2gr nodes, see graph. At 30.8 it is at a bottom out in a flat area and at 31.2 it is a flat area with a sight drop of Velocity increasing .1 grains.

[ATTACH=CONFIG]14727[/ATTACH]

Nice to see some confirmation of that method.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)