Posts: 211
Threads: 39
Joined: Jan 2016
04-17-2017, 06:10 PM
(This post was last modified: 04-17-2017, 06:58 PM by Rebels010.)
I need to buy a new one. Money is not an option. Tell me what you would get.
About my upper, I have a AA built upper (2008) with the Satern (saami chamber) 18 inch deep fluted barrel. It as a MLGS in it. The gas port hole was known for being too large on that barrel. Its very light though and accurate as sin. I will shoot both suppressed and unsuppressed.
Posts: 1,787
Threads: 49
Joined: Feb 2016
Posts: 6,193
Threads: 170
Joined: Mar 2015
JP split yoke, easyer to get proper lined up and don't have to take off muzzle devices to beable to remove the gas block.
Posts: 55
Threads: 3
Joined: Mar 2017
I tried the JP split yoke but it won't clear a 1.3" inside diameter handguard. Fortunately my LGS that I ordered it through returned it no problem and put on a Syrac (or Superlative Arms or whoever they are now) which was cheaper anyway.
Posts: 211
Threads: 39
Joined: Jan 2016
Bruw Wrote:I tried the JP split yoke but it won't clear a 1.3" inside diameter handguard. Fortunately my LGS that I ordered it through returned it no problem and put on a Syrac (or Superlative Arms or whoever they are now) which was cheaper anyway.
My upper is a mega monolithic and the gas block is exposed, so that's not an issue for me.
Posts: 68
Threads: 12
Joined: Sep 2013
Posts: 85
Threads: 9
Joined: Mar 2017
04-18-2017, 07:16 AM
(This post was last modified: 04-18-2017, 07:18 AM by mateba.)
I would choose one that restricts gas from the gas tube and back down the barrel. There are some that bleed gas out the block. There both have their benefits. Please take this with a grain of salt. I am basing my opinion on videos and personal accounts I've read. I do not have any personal experience with this. The restrictive gas blocks take less energy from the barrel and net higher velocity. Bleed off systems net no velocity gains and are similar performance as standard gas blocks but appear to be quieter when suppressed.
https://m.youtube.com/watch?v=UwHA9pvkgYA This is a great video possibly demonstrating that.
That TI SLR is only 1oz. That's pretty cool.
Posts: 3,654
Threads: 17
Joined: Aug 2013
Posts: 211
Threads: 39
Joined: Jan 2016
Klem Wrote:SLR Titanium, clamp-on.
I ordered the SLR titanium, clamp-on this morning. Hope to be shooting it next week. Thanks for all the advise from everyone.
Posts: 211
Threads: 39
Joined: Jan 2016
Gas block finally came in today due a few issues with the vendor on their stock. Hoping to mount it today and see how it functions tomorrow!
Posts: 128
Threads: 12
Joined: Apr 2017
I say SLR clamp on as well.
Posts: 169
Threads: 21
Joined: Aug 2015
DEFINITELY the Micro MOA Govnah 3-port. Three different gas holes you can drill to the perfect size for your setup and switch between on the fly. I have no personal experience with them but I've always wanted one for my rifles that I shoot suppressed & unsuppressed.
This article sold me on them. I'm afraid if I buy one I'll end up getting six more:
http://www.recoilweb.com/micromoas-govna...38489.html
I have the Syrac which I believe is similar design to many of those suggested, but the thing nearly seizes up after only 50-100 rounds through my 300blk. Once you get it set it's not that big of a deal- the rifle will still function fine but I really like the idea of being able to quickly switch between the different sizes for suppressed/unsuppressed/adverse (weak ammo/dirty gun) like on the Govnah. Also, since money is no factor I think the Govnah is the way to go. And I'll be jealous if you get one.
Posts: 3,654
Threads: 17
Joined: Aug 2013
Chrazy-Chris Wrote:I have the Syrac which I believe is similar design to many of those suggested, but the thing nearly seizes up after only 50-100 rounds through my 300blk. .
Have you considered using a non-adjustable for your Blackout?
Posts: 169
Threads: 21
Joined: Aug 2015
Klem Wrote:Have you considered using a non-adjustable for your Blackout?
It's pretty non-adjustable at the moment
Are you talking about using a standard gas block? Or some other type of non-adjustable user customizable block? If so, can you post a link? I have thought about swapping it with the standard gas block on my Grendel so that I can use the Syrac on my Grendel, but I don't know that it's really needed since I have a rifle length gas system on the Grendel. I pretty much just see the adjustable blocks as a nice-to-have. If I had the funds I'd have them on all my rifles because they're fun to tune and it's nice knowing that your rifle is operating on just the right amount of gas but I get by just fine without them.
Posts: 3,654
Threads: 17
Joined: Aug 2013
No, nothing exotic, just a normal non-adjustable block. The BLK calibre is 'under gassed' as an auto calibre. Subsonics barely move the BCG unless there's a suppressor to contain a bit more pressure for reliable cycling. Supersonics spit the cases out to the side so no need to tame the gas there either. With the larger bore volume of 30cal the pressure drops rapidly so by the time it reaches the gas port, even if only at pistol length it doesn't need taming. Nor do you need a heavy buffer, a standard MILSPEC will do.
In your shoes I would save the expensive adjustable block for your Grendel.
Posts: 316
Threads: 10
Joined: Jul 2014
+1, my understanding is 300 blk was designed to function suppressed and unsupressed without changes to the gas system.
