6.5 Grendel Rifle and Chassis Build
#1
Built a Grendel off a Stevens 200 I purchased on Gunbroker. I stripped it down to the receiver and trued the face and bolt abutments. I ordered a X-Caliber SS blank and chambered it. The pics show more of the chassis build than the rifle.

[Image: IMG_20160420_173944_465_zps93xs6nmx.jpg]

[Image: IMG_20160420_193150_219_zpsfwshkfny.jpg]

[Image: IMG_20160420_205211_356_zpsfjsydago.jpg]

[Image: IMG_20160420_205225_902_zps40uekw6g.jpg]
Reply
#2
[Image: IMG_20160421_220013_3111_zpsgr0cjgil.jpg]

[Image: IMG_20160421_220128_6071_zps2oetjnox.jpg]

[Image: IMG_20160421_220144_4781_zpsqeirpklo.jpg]

[Image: IMG_20160421_220916_5071_zps2dbxuytl.jpg]
Reply
#3
[Image: IMG_20160422_215414_8771_zpsi7uo0pp2.jpg]

[Image: IMG_20160422_215434_5891_zpst3qvj2i2.jpg]

[Image: IMG_20160422_215515_1921_zpsrps8saxa.jpg]

[Image: IMG_20160423_131452_112_zps7yqrsf9n.jpg]
Reply
#4
[Image: IMG_20160423_131416_590_zpsw1xduaox.jpg]

[Image: IMG_20160423_211343_1681_zpsyovjhgpy.jpg]

[Image: IMG_20160424_202158_324_zpscwxegqdd.jpg]

[Image: IMG_20160426_242816_0541_zpsgke3840r.jpg]
Reply
#5
[Image: IMG_20160426_201816_522_zpsme0ufcbu.jpg]

[Image: IMG_20160427_211853_526_zpstyatrp6w.jpg]

[Image: IMG_20160429_154913_740_zpseeczkrvh.jpg]

[Image: IMG_20160429_155120_716_zpsmcptzmcg.jpg]
Reply
#6
[Image: IMG_20160429_155807_744_zpsnarj9yuv.jpg]
Reply
#7
[Image: 20160812_2128191_zpsb4nlxy6i.jpg]

[Image: 20160812_2128491_zpslodcvn9c.jpg]

[Image: 20160812_2127001_zpsf7qahr6s.jpg]
Reply
#8
[Image: IMG_20160722_205037_7711_zpsolpoobwj.jpg]

[Image: IMG_20160722_204925_2141_zpsccpi0sxh.jpg]
Reply
#9
Very nice and lots of work to get there.

Looking forward to the range reports
Reply
#10
I just started load development, and I'm getting fair groups and awesome velocities with Leverevolution, under Nosler 123 CC. A little more tweaking and I think I will have an accurate load.
Reply
#11
Now that is what I call building a rifle.

Very impressed.
Knowing everthing isnt as important as knowing where to find it.

Mark Twain

http://www.65grendel.com/forum/showthrea...-Whitetail
Reply
#12
Way cool, very nice and excellent work. Thanks for posting. BANG BANG!!
Reply
#13
Very impressive! Great engineering and machining!
Reply
#14
You are an "artist" sir, that is a fine looking rifle!

I know you have only begun to test but you might try some other traditional bullet, powder combination's for the Grendel.
I.E. SMK, LAPUA Scenar or Hornady Amax bullets with 2520, 8208, CFE are some examples you may be aware of....
Reply
#15
Talk about rolling your own!! Great machine work. Blows anything I've been doing out of the water!!

Richard
Member since 2011, data lost in last hack attack
Reply
#16
Thanks for all the compliments. I bought a AB Arms chassis for my Rem 700 308 build, and that thing was expensive for what it was. I figured, how hard can it be to build my own. I found all the raw materials online, and spent a whopping 75 bucks on them. My time is free, and I find that being in front of the lathe and mill to be a major stress reliever. This chassis was originally built for a Savage 10 in 6.5 Creedmoor. I have a AR 6.5 Grendel, but figured i would build a boltie too. I built a second chassis for the Grendel, but ended up putting the Creedmoor in it. The Grendel chassis is loosely based off the XLR Carbon, and the Creedmoor, off the AICS AX. Here are some pics of the second chassis build.

[Image: IMG_20160729_092742_8571_zpsblb6srda.jpg]

[Image: IMG_20160731_095501_9791_zps9yrhnjvx.jpg]

[Image: IMG_20160731_095532_6681_zpsko7zpmhs.jpg]

[Image: IMG_20160731_214506_150_zpswzt0uzww.jpg]
Reply
#17
[Image: IMG_20160731_214622_606_zpsdu481tjk.jpg]

[Image: IMG_20160807_244438_321_zpsvnjgecff.jpg]

[Image: IMG_20160807_244421_204_zpshjrlaf9z.jpg]

[Image: IMG_20160807_244325_073_zpszmbwjvda.jpg]
Reply
#18
[Image: 20160812_2146511_zpsatvfallo.jpg]

[Image: 20160812_2147411_zps7hknhbbg.jpg]

[Image: 20160812_2148221_zpsisfxipcl.jpg]

[Image: IMG_20160816_211637_806_zpss32lljhk.jpg]
Reply
#19
Which bolt head did you use?
Reply
#20
Ppc
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)