Posts: 40
Threads: 6
Joined: Mar 2011
Sorry for the side street turn, do we have a summary thread for conversion projects? Something that lists what the donor rifles are, which calibers were used, barrel suppliers, amount of work involved to convert (whether Smith is required)...
Nothing consolidated, just different threads.
Posts: 40
Threads: 6
Joined: Mar 2011
Does anyone think it could be accomplished to consolidate? Or not worth the trouble?
Asking for my own benefit for planning my build.
Posts: 2,737
Threads: 44
Joined: Aug 2013
Did I just hear a volunteer?
If it's true that we are here to help others, then what exactly are the others here for?
Posts: 40
Threads: 6
Joined: Mar 2011
I guess the research will commence!
And today I put one of those aftermarket longer bolt handles from Custom Reloading Tools on my 527. The scope is a 2x10 by 50 with a 30mm tube. The rings are Millet medium. I conclude that with the longer aftermarket bolt handle I'll probably change to the LOW Millet rings. There should still be plenty of room!
With this scope I think we are stuck with the factory CZ rings. I do not think we'd clear it with lower rings.
The Triad tactical stock pack solved the cheek weld problem on the CZ527.
I use the Blackhawk one(s). I will say they work, it's just that there is something I dont quite like about them. I'll add the Triad to the list of things I want to try.
I use the Blackhawk cheekrest(s). I will say they work, but there is something about them I don't quite like. I'll add the Triad to my list of things to try. Again thanks.