Help me build this Grendel!!! On the cheap!
|
Help me build this Grendel!!! On the cheap!
|
12-17-2014, 01:06 AM
LRRPF52 Wrote:I can pitch in an AR15 Build Box to help keep everything together, as well as some other parts. I have a lot of extra parts that just sit around. Just let me know what you got buddy and ill pay your for it if it works for the build! Its very hard for me to accept donations i like do do something in return at least... 
12-17-2014, 02:53 AM
Check palmetto state armory over the holidays. They had great deals last year.
12-18-2014, 12:53 AM
TacBlade Wrote:Package sent with lots of parts!!! Tac, we sure appreciate it! Thank you for calling me as well. Tacblade is a true gentleman, and one heck of a man! 
PM sent. A build sheet or list will help out if we can see what you need. I'll do it up, and we can mark off stuff as you go along.
Lower Receiver Group [COLOR="blue"]Lower receiver...check Grip...check (assuming it will be good for 5yr old's hands)[/COLOR] LPK Take Down Pin & Pivot Pin Carbine Extension Tube Trigger Guard Bolt Catch Safety Detent & Spring Mag release button Buffer Extension Tube Lock Nut (Castle Nut) Receiver End Plate Recoil Spring Buttstock suitable for 5yr old, as well as adults Upper Receiver Group Upper Receiver Charge Handle Bolt carrier Cam Pin Firing Pin FPRP 6.5 Grendel Bolt 6.5 Grendel Barrel [COLOR="blue"]Ejection Port Cover Ejection Port Cover rod & C clip Ejection Port Cover spring[/COLOR] Handguard w/corresponding barrel nut Gas block Gas tube Muzzle device Sighting System Optic Mount
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor 6.5 Grendel Reloading Handbooks & chamber brushes can be found here: www.AR15buildbox.com
12-18-2014, 08:56 PM
I can provide a carbine spring and buffer. I have several that have been sitting around for years, and I use special ones anyway, like the JP SCS, MGI RRB, Spike's ST-T2, etc.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor 6.5 Grendel Reloading Handbooks & chamber brushes can be found here: www.AR15buildbox.com 
12-18-2014, 09:21 PM
I have a magpul moe carbine hand guard and telescoping butt stock, if needed.
12-18-2014, 11:52 PM
I have sent the following, but would like sniper 338 to verify it once he receives it.
- Lower Parts kit minus the trigger and the mag release bar. (I did not have these) - Comercial buffer tube with castle nut (only one I had) - Dust cover with rod, spring & c-clip. - Charging handle - Single point sling - Sling loop end plate - Castle nut wrench - New 20 round Magpul mag, works with 5 rounds of 6.5 Grendel. - A bunch of ladder rail covers - few other items I cannot remember?
12-19-2014, 02:56 AM
I am new here but hell I have a mag release and trigger floating around if you need it.... TacBlade were the springs sent? These are all parts left over from other builds. Ambi mag release so just the release it self. Also a Mega Trigger once so I have a stock trigger and maybe the springs for it. Hell who knows but if you want it 338 send me a addy and will put it in the mail.
12-19-2014, 03:25 AM
I think I have sent all the springs needed other than the buffer spring or the trigger springs. I sent a mag button, but did not have the part you screw the button on to.
12-19-2014, 03:35 AM
Well I have that so not a problem to throw it in a envelope or a box.
12-19-2014, 04:33 AM
Thank yall so much! Words cant say how much all this is all appreciated!
12-19-2014, 05:01 AM
I enjoy seeing rifles built for people who do not build them. I have no issue on passing it along if I have it so like I said all I want to see is a pic when it s done. Parts will go out tomorrow or the next day just let me know!
12-19-2014, 04:19 PM
Ill post pictures of it all for everyone to see, it aint no bushmaster, magpul, aero precision parts anymore.... its 65 Grendel.com built!
12-24-2014, 04:20 AM
Update:
We now have: Lower charging handle buffer tube-milspec Take down pins grip ejection port cover assymbly trigger guard bolt release knob safety dentent and spring mag release button - but not the mag catch part sling adapters sling
12-24-2014, 04:24 AM
Few little parts still needed but almost got all the parts for the lower minus the collapable stock, buffer, buffer spring, buffer stop, trigger, trigger pins, and a pin for the other side of the trigger guard. I think... haha.
Thank you again tacblade!
Here's the updated Build List, with parts you have in blue.
Lower Receiver Group [COLOR="blue"]Lower receiver...check Grip...check (assuming it will be good for 5yr old's hands)[/COLOR] LPK Take Down Pin & Pivot Pin Carbine Extension Tube Trigger Guard Bolt Catch Safety Detent & Spring Mag release button Buffer Extension Tube Lock Nut (Castle Nut) Receiver End Plate Recoil Spring Buttstock suitable for 5yr old, as well as adults Upper Receiver Group Upper Receiver Charge Handle Bolt carrier Cam Pin Firing Pin FPRP 6.5 Grendel Bolt 6.5 Grendel Barrel [COLOR="blue"]Ejection Port Cover Ejection Port Cover rod & C clip Ejection Port Cover spring[/COLOR] Handguard w/corresponding barrel nut Gas block Gas tube Muzzle device Sighting System Optic Mount
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor 6.5 Grendel Reloading Handbooks & chamber brushes can be found here: www.AR15buildbox.com |
|
« Next Oldest | Next Newest »
|
