Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Shooters World Precision Powder
#21
This may not be my smallest 5 shot group ever, but it could be my favorite. Houston, we have a zero. Second pic is layed over a clean target with the aiming point.

[ATTACH=CONFIG]18552[/ATTACH][ATTACH=CONFIG]18553[/ATTACH]

OB, I don't have a drop tube since I've never needed one, but I should probably pick one up. Then again, I don't know if I want to change anything!


Attached Files
.jpg   IMG_20220102_151444_copy_528x508.jpg (Size: 64.04 KB / Downloads: 30)
.jpg   IMG_20220102_151525_copy_428x415.jpg (Size: 48.36 KB / Downloads: 28)
Let's go Brandon!
Reply
#22
StoneHendge... Mine is home made from brass tubes I got at a local hobby shop. My original was 30" long for loading black powder cartridges (cut in half now). 1F, 2F or cartridge grade black powder is pretty chunky stuff. Brass for today's BP cartridges is a lot thicker than the original cases from the late 1800's. To get the amount of powder used in the old days is near impossible. To get close to those charges now days you need a drop tube to get as much powder into the case as possible. I've often used my shortened tube when loading extruded powders in small cases.
I refuse to be victimized by notions of virtuous behavior.
Reply
#23
Quote:Case is a 9x Lapua, GM205M, 123 gr Scenar at a COAL of 2.25" which is 0.02" off the lands. Chamber on the 22" JP barrel is tight. I usually max out 0.6-0.8 gr below everyone else for a given velocity for a combo. 2500 is where I'm comfortable with AR Comp and where the "node" is. High 2400s is where I max with H4895 and XBR, with both feeling a bit uncomfortable approaching 2500.

Hornady max for Varget is 28.9. I loaded up 15 rounds with 25.7 to 28.5 gr of SWP in 0.2 gr increments. 28.5 was just above the brass' neck shoulder junction on pouring and just below the junction with 10 taps on the bench. Yes it's compressed, but there isn't a crunch. I used different aiming points for the first, mid and last 5. With Magnetto strapped on, no group was under MOA and the last 4 made a ragged hole with velocities at:

28.1:2417;
28.3:2424;
28.5:2432.

So we’re looking at:

22” JP 6.5 Grendel barrel with tight chamber

123gr Scenar
2.250” COL
Shooter’s World Precision Powder

I checked AA data for Varget and you’re dead-on with that from a 24” barrel shooting the 123gr Scenar.

AA shows 2400fps with 28.5gr of Varget under 123gr Scenar and SMK.

That powder might do really well in 6mm AR I think.

Looks like a true precision powder in Grendel, albeit somewhat slow.
NRA Basic, Pistol, Rifle, Shotgun, RSO

CCW, CQM, DM, Long Range Rifle Instructor

6.5 Grendel Reloading Handbooks & chamber brushes can be found here:

www.AR15buildbox.com
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)