10-08-2014, 08:17 PM
(This post was last modified: 10-08-2014, 08:22 PM by NugginFutz.)
Adam - the exchange appeared over at M4carbine. The mod there hosed them down for pulling an Oprah. Pretty much the same thing I've seen from woohoo/constructor, whenever he wants to thump his chest.
Cory,
In May, this year, I measured my BHW 264LBC for COAL for the 123 gr Amax. The barrel had 980 rounds through it, at the time.
Using the Sinclair tool, I came up with 2.272" COAL. My Hornady LNL comparator gave me 2.277" COAL. I suspect the extra .005" has to do with the use of the Hornady special case, coupled with the light "seating tap" I applied when pushing the bullet into position.
ETA: Since it is the only pill this barrel has ever shot, I can't offer any accuracy comparisons, but I've posted a few examples of what it can do. On average, it will give me .5 to .75 MOA. When I avoid coffee and donuts, it will drill it.
Cory,
In May, this year, I measured my BHW 264LBC for COAL for the 123 gr Amax. The barrel had 980 rounds through it, at the time.
Using the Sinclair tool, I came up with 2.272" COAL. My Hornady LNL comparator gave me 2.277" COAL. I suspect the extra .005" has to do with the use of the Hornady special case, coupled with the light "seating tap" I applied when pushing the bullet into position.
ETA: Since it is the only pill this barrel has ever shot, I can't offer any accuracy comparisons, but I've posted a few examples of what it can do. On average, it will give me .5 to .75 MOA. When I avoid coffee and donuts, it will drill it.