10-08-2014, 08:36 AM
(This post was last modified: 10-08-2014, 12:17 PM by SHORT-N-SASSY.)
[SIZE="3"]In view of the high Ballistic Coefficient of the projectiles used in the 6.5mm Grendel vs the 6.8mm SPC http://mobile.outdoorhistory.com/xmlui/b...equence-54 (Click-on the 6.8x43mm SPC - 6.5mm Grendel cartridge cutaways *) and the resultant superior downrange performance of the Grendel, what's it going to take to change this http://www.xcrforum.com/forum/attachment...ge0422.jpg to effect a M249 SAW in 6.5mm Grendel?
* ETA: Shooting Times, February, 2005, Cooking Up Loads For The 6.5mm Grendel, By David Fortier (5 Pages):
http://mobile.outdoorhistory.com/xmlui/b...equence=52
http://mobile.outdoorhistory.com/xmlui/b...equence=53
http://mobile.outdoorhistory.com/xmlui/b...equence=54
http://mobile.outdoorhistory.com/xmlui/b...equence=55
http://mobile.outdoorhistory.com/xmlui/b...equence=56
[/SIZE]
* ETA: Shooting Times, February, 2005, Cooking Up Loads For The 6.5mm Grendel, By David Fortier (5 Pages):
http://mobile.outdoorhistory.com/xmlui/b...equence=52
http://mobile.outdoorhistory.com/xmlui/b...equence=53
http://mobile.outdoorhistory.com/xmlui/b...equence=54
http://mobile.outdoorhistory.com/xmlui/b...equence=55
http://mobile.outdoorhistory.com/xmlui/b...equence=56
[/SIZE]

