Have you ever heard of bending an Upper receiver?

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Have you ever heard of bending an Upper receiver?

Wheelhorse Offline

Offline

Member

Posts: 243
Threads: 13
Joined: May 2014

#43

08-18-2014, 05:08 PM (This post was last modified: 08-18-2014, 05:23 PM by Wheelhorse.)

Any tool which locks inside the lugs on the barrel extension, transmits no torque through the barrel and with proper lubrication very little will be on the pin. Several things have improved since 1968, this is just one of them.

[Image: arext_zps516d19d6.jpg]

Find

Reply

« Next Oldest | Next Newest »

Messages In This Thread

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-17-2014, 03:19 PM

Have you ever heard of bending an Upper receiver? - by Slappy - 03-17-2014, 03:26 PM

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-17-2014, 03:42 PM

Have you ever heard of bending an Upper receiver? - by stanprophet - 03-17-2014, 04:18 PM

Have you ever heard of bending an Upper receiver? - by Tedward - 03-17-2014, 05:19 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 05:58 PM

Have you ever heard of bending an Upper receiver? - by Sojorboy - 03-17-2014, 07:33 PM

Have you ever heard of bending an Upper receiver? - by dmsims21 - 03-17-2014, 07:42 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 07:43 PM

Have you ever heard of bending an Upper receiver? - by Sojorboy - 03-17-2014, 08:18 PM

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-17-2014, 10:38 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 10:45 PM

Have you ever heard of bending an Upper receiver? - by Slappy - 03-17-2014, 10:56 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 10:59 PM

Have you ever heard of bending an Upper receiver? - by stevegun 1 - 03-18-2014, 12:12 AM

Have you ever heard of bending an Upper receiver? - by montana - 03-18-2014, 12:22 AM

Have you ever heard of bending an Upper receiver? - by Klem - 03-18-2014, 01:00 AM

Have you ever heard of bending an Upper receiver? - by cory - 03-18-2014, 01:35 AM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-18-2014, 02:07 AM

Have you ever heard of bending an Upper receiver? - by Butterbean - 03-18-2014, 02:10 AM

Have you ever heard of bending an Upper receiver? - by Klem - 03-18-2014, 03:26 AM

Have you ever heard of bending an Upper receiver? - by explorecaves - 03-19-2014, 09:17 PM

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-19-2014, 11:02 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-19-2014, 11:08 PM

Have you ever heard of bending an Upper receiver? - by radian23 - 03-19-2014, 11:23 PM

Have you ever heard of bending an Upper receiver? - by burkew23 - 05-29-2014, 07:31 PM

Have you ever heard of bending an Upper receiver? - by cory - 05-29-2014, 08:07 PM

Have you ever heard of bending an Upper receiver? - by burkew23 - 05-29-2014, 11:03 PM

Have you ever heard of bending an Upper receiver? - by Rust - 06-12-2014, 06:01 AM

Have you ever heard of bending an Upper receiver? - by cst - 06-12-2014, 10:41 AM

Have you ever heard of bending an Upper receiver? - by waveslayer - 06-12-2014, 07:08 PM

Have you ever heard of bending an Upper receiver? - by jurassic - 06-12-2014, 11:39 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-15-2014, 04:59 AM

Have you ever heard of bending an Upper receiver? - by Ullr - 08-15-2014, 04:44 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-15-2014, 05:34 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-15-2014, 09:52 PM

Have you ever heard of bending an Upper receiver? - by Ullr - 08-17-2014, 03:37 AM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-17-2014, 06:16 AM

Have you ever heard of bending an Upper receiver? - by montana - 08-17-2014, 01:56 PM

Have you ever heard of bending an Upper receiver? - by Klem - 08-18-2014, 12:53 AM

Have you ever heard of bending an Upper receiver? - by rasp65 - 08-18-2014, 01:16 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-18-2014, 03:24 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-18-2014, 05:08 PM

Have you ever heard of bending an Upper receiver? - by Ashe - 08-18-2014, 06:26 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-18-2014, 06:45 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-18-2014, 11:42 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-19-2014, 12:25 AM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-19-2014, 01:29 AM

Have you ever heard of bending an Upper receiver? - by montana - 08-19-2014, 01:54 AM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-19-2014, 05:13 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-19-2014, 05:45 PM

Have you ever heard of bending an Upper receiver? - by Variable - 08-19-2014, 10:33 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-19-2014, 11:57 PM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 02:37 AM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-20-2014, 03:02 AM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 03:05 AM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-20-2014, 03:17 AM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 03:25 AM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-20-2014, 06:11 PM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 10:47 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-20-2014, 11:05 PM

Have you ever heard of bending an Upper receiver? - by rasp65 - 08-21-2014, 02:37 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-21-2014, 03:18 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-22-2014, 11:49 AM

Have you ever heard of bending an Upper receiver? - by Variable - 08-22-2014, 12:28 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-22-2014, 12:32 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-22-2014, 01:04 PM

Have you ever heard of bending an Upper receiver? - by montana - 08-22-2014, 01:08 PM

Have you ever heard of bending an Upper receiver? - by rasp65 - 08-31-2014, 08:06 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 09-01-2014, 01:27 AM

Have you ever heard of bending an Upper receiver? - by montana - 09-01-2014, 04:24 AM

Have you ever heard of bending an Upper receiver? - by pinzgauer - 09-01-2014, 02:02 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 09-01-2014, 07:12 PM

Have you ever heard of bending an Upper receiver? - by KentuckyBuddha - 09-01-2014, 07:54 PM

Have you ever heard of bending an Upper receiver? - by burkew23 - 09-27-2014, 04:32 AM

Have you ever heard of bending an Upper receiver? - by Variable - 09-27-2014, 05:12 AM

View a Printable Version

Forum Jump:

Users browsing this thread: 1 Guest(s)