Have you ever heard of bending an Upper receiver?

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Have you ever heard of bending an Upper receiver?

NugginFutz Offline

Offline

Posting Freak

Posts: 2,737
Threads: 44
Joined: Aug 2013

#42

08-18-2014, 03:24 PM (This post was last modified: 08-18-2014, 03:27 PM by NugginFutz.)

montana Wrote:The Department Of The Army Technical Manual TM 9-1005-249-34 copy 1968 instructs using a aluminum barrel vice jaws clamp similar to stevegun1 posted on this thread.

It further states that the armorer should inspect the barrel pin and receiver slot alignment for signs of wear, by bore sighting a vertical line and referencing the front sight. This suggests that clamping the barrel and torquing the barrel nut might cause the slot to widen or the pin to bend, causing a potential misalignment. Such a misalignment can potentially cause problems with the bolt locking properly.

Find

Reply

« Next Oldest | Next Newest »

Messages In This Thread

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-17-2014, 03:19 PM

Have you ever heard of bending an Upper receiver? - by Slappy - 03-17-2014, 03:26 PM

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-17-2014, 03:42 PM

Have you ever heard of bending an Upper receiver? - by stanprophet - 03-17-2014, 04:18 PM

Have you ever heard of bending an Upper receiver? - by Tedward - 03-17-2014, 05:19 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 05:58 PM

Have you ever heard of bending an Upper receiver? - by Sojorboy - 03-17-2014, 07:33 PM

Have you ever heard of bending an Upper receiver? - by dmsims21 - 03-17-2014, 07:42 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 07:43 PM

Have you ever heard of bending an Upper receiver? - by Sojorboy - 03-17-2014, 08:18 PM

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-17-2014, 10:38 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 10:45 PM

Have you ever heard of bending an Upper receiver? - by Slappy - 03-17-2014, 10:56 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-17-2014, 10:59 PM

Have you ever heard of bending an Upper receiver? - by stevegun 1 - 03-18-2014, 12:12 AM

Have you ever heard of bending an Upper receiver? - by montana - 03-18-2014, 12:22 AM

Have you ever heard of bending an Upper receiver? - by Klem - 03-18-2014, 01:00 AM

Have you ever heard of bending an Upper receiver? - by cory - 03-18-2014, 01:35 AM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-18-2014, 02:07 AM

Have you ever heard of bending an Upper receiver? - by Butterbean - 03-18-2014, 02:10 AM

Have you ever heard of bending an Upper receiver? - by Klem - 03-18-2014, 03:26 AM

Have you ever heard of bending an Upper receiver? - by explorecaves - 03-19-2014, 09:17 PM

Have you ever heard of bending an Upper receiver? - by waveslayer - 03-19-2014, 11:02 PM

Have you ever heard of bending an Upper receiver? - by LRRPF52 - 03-19-2014, 11:08 PM

Have you ever heard of bending an Upper receiver? - by radian23 - 03-19-2014, 11:23 PM

Have you ever heard of bending an Upper receiver? - by burkew23 - 05-29-2014, 07:31 PM

Have you ever heard of bending an Upper receiver? - by cory - 05-29-2014, 08:07 PM

Have you ever heard of bending an Upper receiver? - by burkew23 - 05-29-2014, 11:03 PM

Have you ever heard of bending an Upper receiver? - by Rust - 06-12-2014, 06:01 AM

Have you ever heard of bending an Upper receiver? - by cst - 06-12-2014, 10:41 AM

Have you ever heard of bending an Upper receiver? - by waveslayer - 06-12-2014, 07:08 PM

Have you ever heard of bending an Upper receiver? - by jurassic - 06-12-2014, 11:39 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-15-2014, 04:59 AM

Have you ever heard of bending an Upper receiver? - by Ullr - 08-15-2014, 04:44 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-15-2014, 05:34 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-15-2014, 09:52 PM

Have you ever heard of bending an Upper receiver? - by Ullr - 08-17-2014, 03:37 AM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-17-2014, 06:16 AM

Have you ever heard of bending an Upper receiver? - by montana - 08-17-2014, 01:56 PM

Have you ever heard of bending an Upper receiver? - by Klem - 08-18-2014, 12:53 AM

Have you ever heard of bending an Upper receiver? - by rasp65 - 08-18-2014, 01:16 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-18-2014, 03:24 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-18-2014, 05:08 PM

Have you ever heard of bending an Upper receiver? - by Ashe - 08-18-2014, 06:26 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-18-2014, 06:45 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-18-2014, 11:42 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-19-2014, 12:25 AM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-19-2014, 01:29 AM

Have you ever heard of bending an Upper receiver? - by montana - 08-19-2014, 01:54 AM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-19-2014, 05:13 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-19-2014, 05:45 PM

Have you ever heard of bending an Upper receiver? - by Variable - 08-19-2014, 10:33 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-19-2014, 11:57 PM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 02:37 AM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-20-2014, 03:02 AM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 03:05 AM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 08-20-2014, 03:17 AM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 03:25 AM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-20-2014, 06:11 PM

Have you ever heard of bending an Upper receiver? - by Variable - 08-20-2014, 10:47 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-20-2014, 11:05 PM

Have you ever heard of bending an Upper receiver? - by rasp65 - 08-21-2014, 02:37 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-21-2014, 03:18 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-22-2014, 11:49 AM

Have you ever heard of bending an Upper receiver? - by Variable - 08-22-2014, 12:28 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 08-22-2014, 12:32 PM

Have you ever heard of bending an Upper receiver? - by Keep The Change - 08-22-2014, 01:04 PM

Have you ever heard of bending an Upper receiver? - by montana - 08-22-2014, 01:08 PM

Have you ever heard of bending an Upper receiver? - by rasp65 - 08-31-2014, 08:06 PM

Have you ever heard of bending an Upper receiver? - by Wheelhorse - 09-01-2014, 01:27 AM

Have you ever heard of bending an Upper receiver? - by montana - 09-01-2014, 04:24 AM

Have you ever heard of bending an Upper receiver? - by pinzgauer - 09-01-2014, 02:02 PM

Have you ever heard of bending an Upper receiver? - by NugginFutz - 09-01-2014, 07:12 PM

Have you ever heard of bending an Upper receiver? - by KentuckyBuddha - 09-01-2014, 07:54 PM

Have you ever heard of bending an Upper receiver? - by burkew23 - 09-27-2014, 04:32 AM

Have you ever heard of bending an Upper receiver? - by Variable - 09-27-2014, 05:12 AM

View a Printable Version

Forum Jump:

Users browsing this thread: 1 Guest(s)