07-12-2014, 06:13 AM
My apologies for the delay.
You can see the difference in the feed lips. Modified on the left, stock on the right.
[ATTACH=CONFIG]5383[/ATTACH]
And inside the magazine with the cartridge guide ribs. These need to be modified until the cartridge falls through without interruption, then work on the feeding from the lips.
Modified
[ATTACH=CONFIG]5384[/ATTACH]
Standard
[ATTACH=CONFIG]5381[/ATTACH]
You need to not only have the cartridge come out of the magazine, but it must be the correct height.
[ATTACH=CONFIG]5380[/ATTACH]
The finished rifle.
[ATTACH=CONFIG]5382[/ATTACH]
6mm BR
Pierce Titanium Action
Lilja #4 1:8 twist, 3 groove
March 3-24x42mm
Wildcat Composites Carbon Fibre stock with clear gelcoat
Atlasworx bottom metal
All in Graphite Black Cerakote
You will notice the cut 'n shut magazine. Standard length fits 7 x BR, this one fits 5.
You can see the difference in the feed lips. Modified on the left, stock on the right.
[ATTACH=CONFIG]5383[/ATTACH]
And inside the magazine with the cartridge guide ribs. These need to be modified until the cartridge falls through without interruption, then work on the feeding from the lips.
Modified
[ATTACH=CONFIG]5384[/ATTACH]
Standard
[ATTACH=CONFIG]5381[/ATTACH]
You need to not only have the cartridge come out of the magazine, but it must be the correct height.
[ATTACH=CONFIG]5380[/ATTACH]
The finished rifle.
[ATTACH=CONFIG]5382[/ATTACH]
6mm BR
Pierce Titanium Action
Lilja #4 1:8 twist, 3 groove
March 3-24x42mm
Wildcat Composites Carbon Fibre stock with clear gelcoat
Atlasworx bottom metal
All in Graphite Black Cerakote
You will notice the cut 'n shut magazine. Standard length fits 7 x BR, this one fits 5.