05-20-2014, 08:45 PM
The 264 LBC has a tighter neck and some 7.62x39 brass might need to be neck turned to make sure you have enough room for bullet release.
Forster makes a hand held tool for this that works well and isn't very expensive.
I put the brass in a cordless drill and do around 20 at a time.
It evens up the neck thickness and usually improves accuracy.
Forster makes a hand held tool for this that works well and isn't very expensive.
I put the brass in a cordless drill and do around 20 at a time.
It evens up the neck thickness and usually improves accuracy.