Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s
#87
Thank you all for these first hints! I will definately tryout the CFE. Do manufacture your handloads to max. allowable case length (57,40mm/2,259")?

I do have 200 Lapua Scenar-L bullets available 4PL6019 GB546 136 grs.

I will definately setup some loading ladders next weekend according to both reloading manuals.

What do you say to these ladders:

123 grs. Lapua Scenar
Hornady Case
CCI450 Primer
COAL: 57,10mm
Powder: CFE223
five rounds each:
28,0 grs
28,5 grs
29,0 grs
29,5 grs
30,0 grs

123. grs Sierra MatchKing
Alexander Arms Case
CCI450
COAL: 57,10mm
Powder: BLC-2
five rounds each:
28,0 grs
28,5 grs
29,0 grs
29,5 grs
30,0 grs

136 grs. Lapua Scenar-L
Lapua Case
CCI450
COAL: 57,10mm
Powder N140 or similar
five rounds each:
26,0 grs
26,5 grs
27,0 grs
27,5 grs
28,0 grs
No data in Quickload to this bullet, maybe I´ll write an email to Mr. Brömel!

123 grs.Hornady AMAX
Hornady Case
CCI450
COAL: 57,10mm
Powder: CFE223
five rounds each:
28,0 grs
28,5 grs
29,0 grs
29,5 grs
30,0 grs
30,5 grs
31,0 grs
31,5 grs
Reply


Messages In This Thread
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by IndyGrendel63 - 08-01-2012, 02:33 AM
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by XcountryRider - 07-13-2013, 10:40 PM
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by XcountryRider - 07-13-2013, 11:36 PM
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by explorecaves - 02-06-2014, 01:37 PM
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by explorecaves - 02-06-2014, 11:11 PM
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by A.D.D. AR - 05-02-2014, 02:50 AM
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by Kohoki - 05-19-2014, 12:50 PM
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s - by A.D.D. AR - 06-29-2014, 04:05 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)