04-10-2014, 10:29 AM
Looks like a nice long barrel for sure and should work for its purpose. Is it a 12" Nordic Components HG with a DPMS Slick Side Upper? Or is that a 15" HG? Barrel goes out of the picture so maybe you need a wide angle lens 
Look forward to the Chrony. Would like to see if you get any added speeds for the 26" barrel. I think being a LCB 264, you will be able to get full length mag bullets in there and still be off the lands then. Also looks Fluted, did you leave 2" at the end not fluted so if you do decide to cut it down you don't cut into the flutes?
I'll be looking for followup reports, and can you post some OAL and measurments to the Ogive ("CBtO" Case Back to Ogive).
Thanks for sharing....
Look forward to the Chrony. Would like to see if you get any added speeds for the 26" barrel. I think being a LCB 264, you will be able to get full length mag bullets in there and still be off the lands then. Also looks Fluted, did you leave 2" at the end not fluted so if you do decide to cut it down you don't cut into the flutes?
I'll be looking for followup reports, and can you post some OAL and measurments to the Ogive ("CBtO" Case Back to Ogive).
Thanks for sharing....