Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CFE and compressed loads
#1
I have to go no higher than 31 grains with 123 SSTs at a COL of 2.237 or the powder seems to be getting compressed.
I'm getting sub MOA with this load using rem primers and 2460 fps average and low ES.Should I stick with this load.
I've gone up to 31.8 grains at COL 2.250 but I'm thinking maybe its compressed too much.
The groups are close but I'm only gained around 40 to 50 fps and higher ES.;
Reply


Messages In This Thread
CFE and compressed loads - by 45r - 03-11-2014, 01:38 AM
CFE and compressed loads - by NugginFutz - 03-11-2014, 01:50 AM
CFE and compressed loads - by LRRPF52 - 03-11-2014, 03:54 AM
CFE and compressed loads - by 45r - 03-11-2014, 03:52 PM
CFE and compressed loads - by mseric - 03-11-2014, 06:03 PM
CFE and compressed loads - by 45r - 03-12-2014, 12:39 AM
CFE and compressed loads - by Drifter - 03-12-2014, 03:42 AM
CFE and compressed loads - by 45r - 03-12-2014, 06:48 PM
CFE and compressed loads - by LRRPF52 - 03-12-2014, 06:55 PM
CFE and compressed loads - by 45r - 03-12-2014, 10:26 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)