Fire forming with 7.62x39 RWS brass
|
Fire forming with 7.62x39 RWS brass
|
|
03-08-2014, 06:21 PM
LRRPF52 Wrote:Most people get great accuracy with fire-forming loads in the Grendel, and since the pressures are low, might as well get some good trigger time in with them. That was my thought too. Have a couple hundred Sierra 85 grainers on the way. Not much else available right now for inexpensive bullets. |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 03:47 AM
Fire forming with 7.62x39 RWS brass - by explorecaves - 03-08-2014, 03:01 PM
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 03:27 PM
Fire forming with 7.62x39 RWS brass - by explorecaves - 03-08-2014, 03:35 PM
Fire forming with 7.62x39 RWS brass - by LRRPF52 - 03-08-2014, 03:50 PM
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 03:55 PM
Fire forming with 7.62x39 RWS brass - by mseric - 03-08-2014, 05:10 PM
Fire forming with 7.62x39 RWS brass - by LRRPF52 - 03-08-2014, 05:11 PM
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 06:21 PM
Fire forming with 7.62x39 RWS brass - by 45r - 03-08-2014, 07:20 PM
Fire forming with 7.62x39 RWS brass - by LRRPF52 - 03-08-2014, 07:29 PM
Fire forming with 7.62x39 RWS brass - by 45r - 03-08-2014, 08:05 PM
|