6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Ammunition & Reloading v
Fire forming with 7.62x39 RWS brass

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Fire forming with 7.62x39 RWS brass
explorecaves
Unregistered
 
#4
03-08-2014, 03:35 PM
Shouldn't be any different than other brass. Just work up to the load needed to fire form. And as long as you keep the loads moderate, you should be able to get several reloads out of it.
Reply


Messages In This Thread
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 03:47 AM
Fire forming with 7.62x39 RWS brass - by explorecaves - 03-08-2014, 03:01 PM
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 03:27 PM
Fire forming with 7.62x39 RWS brass - by explorecaves - 03-08-2014, 03:35 PM
Fire forming with 7.62x39 RWS brass - by LRRPF52 - 03-08-2014, 03:50 PM
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 03:55 PM
Fire forming with 7.62x39 RWS brass - by mseric - 03-08-2014, 05:10 PM
Fire forming with 7.62x39 RWS brass - by LRRPF52 - 03-08-2014, 05:11 PM
Fire forming with 7.62x39 RWS brass - by Ridz - 03-08-2014, 06:21 PM
Fire forming with 7.62x39 RWS brass - by 45r - 03-08-2014, 07:20 PM
Fire forming with 7.62x39 RWS brass - by LRRPF52 - 03-08-2014, 07:29 PM
Fire forming with 7.62x39 RWS brass - by 45r - 03-08-2014, 08:05 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)