6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel ARs and Other Semi-Autos v
Grendel Bolt measures .138

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Grendel Bolt measures .138
PigOPs
Unregistered
 
#6
03-02-2014, 04:12 AM
Also check the overall length of your bolt (It should be 2.810"). If it's too short your firing pin may be protruding too far. Your firing pin tip needs a good look too. Usually if you pierce a primer there is damage to the firing pin that could cause subsequent issues.
Reply


Messages In This Thread
Grendel Bolt measures .138 - by MTNmyMAG - 03-01-2014, 09:47 PM
Grendel Bolt measures .138 - by PigOPs - 03-02-2014, 01:41 AM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 03:02 AM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 03:26 AM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 03:47 AM
Grendel Bolt measures .138 - by PigOPs - 03-02-2014, 04:12 AM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 04:17 AM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 04:55 AM
Grendel Bolt measures .138 - by NugginFutz - 03-02-2014, 06:02 AM
Grendel Bolt measures .138 - by HuntTXhogs - 03-02-2014, 03:42 PM
Grendel Bolt measures .138 - by NugginFutz - 03-02-2014, 06:25 PM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 11:45 PM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 11:48 PM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 11:58 PM
Grendel Bolt measures .138 - by HuntTXhogs - 03-03-2014, 12:34 AM
Grendel Bolt measures .138 - by MTNmyMAG - 03-03-2014, 01:54 AM
Grendel Bolt measures .138 - by HuntTXhogs - 03-03-2014, 03:07 AM
Grendel Bolt measures .138 - by NugginFutz - 03-03-2014, 04:19 AM
Grendel Bolt measures .138 - by HuntTXhogs - 03-03-2014, 12:40 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)