Grendel Bolt measures .138
|
Grendel Bolt measures .138
|
|
03-01-2014, 09:47 PM
You may have seen my other thread on the issues I have had with my Rifle and high pressure signs at under max charges. I measured my bolt face depth again today and came up with .138. I assume .002 over length could cause the primer signs I am seeing. I am not sure the manufacture of this bolt is there any known example of my issue from 2 to 3 years ago?
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Grendel Bolt measures .138 - by MTNmyMAG - 03-01-2014, 09:47 PM
Grendel Bolt measures .138 - by PigOPs - 03-02-2014, 01:41 AM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 03:02 AM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 03:26 AM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 03:47 AM
Grendel Bolt measures .138 - by PigOPs - 03-02-2014, 04:12 AM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 04:17 AM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 04:55 AM
Grendel Bolt measures .138 - by NugginFutz - 03-02-2014, 06:02 AM
Grendel Bolt measures .138 - by HuntTXhogs - 03-02-2014, 03:42 PM
Grendel Bolt measures .138 - by NugginFutz - 03-02-2014, 06:25 PM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 11:45 PM
Grendel Bolt measures .138 - by MTNmyMAG - 03-02-2014, 11:48 PM
Grendel Bolt measures .138 - by LRRPF52 - 03-02-2014, 11:58 PM
Grendel Bolt measures .138 - by HuntTXhogs - 03-03-2014, 12:34 AM
Grendel Bolt measures .138 - by MTNmyMAG - 03-03-2014, 01:54 AM
Grendel Bolt measures .138 - by HuntTXhogs - 03-03-2014, 03:07 AM
Grendel Bolt measures .138 - by NugginFutz - 03-03-2014, 04:19 AM
Grendel Bolt measures .138 - by HuntTXhogs - 03-03-2014, 12:40 PM
|